The class of the iterator returned by the iterator method. multiple take, drop, and slice operations on this iterator are bunched together for better efficiency.
A class supporting filtered operations. Instances of this class are returned by method withFilter.
The type implementing this traversable
Returns the runtime class representation of the object.
a class object corresponding to the runtime type of the receiver.
Creates a string builder buffer as builder for this class
A version of this collection with all of the operations implemented sequentially (i.e., in a single-threaded manner).
This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.
a sequential view of the collection.
Test two objects for inequality.
true if !(this == that), false otherwise.
Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.
a hash value consistent with ==
Returns a new traversable collection containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the traversable collection is the most specific superclass encompassing the element types of the two operands.
the element type of the returned collection.
the class of the returned collection. Where possible, That is the same class as the current collection class Repr, but this depends on the element type B being admissible for that class, which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the traversable to append.
an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and the new element type B.
a new collection of type That which contains all elements of this traversable collection followed by all elements of that.
As with ++, returns a new collection containing the elements from the left operand followed by the elements from the right operand.
It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
This overload exists because: for the implementation of ++: we should reuse that of ++ because many collections override it with more efficient versions.
Since TraversableOnce has no ++ method, we have to implement that directly, but Traversable and down can use the overload.
the element type of the returned collection.
the class of the returned collection. Where possible, That is the same class as the current collection class Repr, but this depends on the element type B being admissible for that class, which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the traversable to append.
an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and the new element type B.
a new collection of type That which contains all elements of this traversable collection followed by all elements of that.
As with ++, returns a new collection containing the elements from the left operand followed by the elements from the right operand.
It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
the element type of the returned collection.
the traversable to append.
a new string which contains all elements of this string followed by all elements of that.
A copy of the string with an element prepended.
Note that :-ending operators are right associative (see example). A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.
Also, the original string is not modified, so you will want to capture the result.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = 2 +: x y: List[Int] = List(2, 1) scala> println(x) List(1)
the prepended element
a new string consisting of elem followed by all elements of this string.
Applies a binary operator to a start value and all elements of this traversable or iterator, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as xs foldLeft z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this traversable or iterator, going left to right with the start value z on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x1, ..., xn are the elements of this traversable or iterator.
A copy of this string with an element appended.
A mnemonic for +: vs. :+ is: the COLon goes on the COLlection side.
Example:
scala> val a = List(1) a: List[Int] = List(1) scala> val b = a :+ 2 b: List[Int] = List(1, 2) scala> println(a) List(1)
the appended element
a new string consisting of all elements of this string followed by elem.
Applies a binary operator to all elements of this traversable or iterator and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as xs foldRight z.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this traversable or iterator, going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this traversable or iterator.
Returns true if this is less than that
Returns true if this is less than or equal to that.
Test two objects for equality. The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).
true if the receiver object is equivalent to the argument; false otherwise.
Returns true if this is greater than that.
Returns true if this is greater than or equal to that.
Appends all elements of this traversable or iterator to a string builder. The written text consists of the string representations (w.r.t. the method toString) of all elements of this traversable or iterator without any separator string.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> val h = a.addString(b) h: StringBuilder = 1234
the string builder to which elements are appended.
the string builder b to which elements were appended.
Appends all elements of this traversable or iterator to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString) of all elements of this traversable or iterator, separated by the string sep.
Example:
scala> val a = List(1,2,3,4) a: List[Int] = List(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, ", ") res0: StringBuilder = 1, 2, 3, 4
the string builder to which elements are appended.
the separator string.
the string builder b to which elements were appended.
Appends all elements of this traversable or iterator to a string builder using start, end, and separator strings. The written text begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this traversable or iterator are separated by the string sep.
Example:
scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)
scala> val b = new StringBuilder()
b: StringBuilder =
scala> a.addString(b , "List(" , ", " , ")")
res5: StringBuilder = List(1, 2, 3, 4)
the string builder to which elements are appended.
the starting string.
the separator string.
the ending string.
the string builder b to which elements were appended.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It is similar to foldLeft in that it doesn't require the result to be a supertype of the element type. In addition, it allows parallel collections to be processed in chunks, and then combines the intermediate results.
aggregate splits the traversable or iterator into partitions and processes each partition by sequentially applying seqop, starting with z (like foldLeft). Those intermediate results are then combined by using combop (like fold). The implementation of this operation may operate on an arbitrary number of collection partitions (even 1), so combop may be invoked an arbitrary number of times (even 0).
As an example, consider summing up the integer values of a list of chars. The initial value for the sum is 0. First, seqop transforms each input character to an Int and adds it to the sum (of the partition). Then, combop just needs to sum up the intermediate results of the partitions:
List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })
the type of accumulated results
the initial value for the accumulated result of the partition - this will typically be the neutral element for the seqop operator (e.g. Nil for list concatenation or 0 for summation) and may be evaluated more than once
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Return element at index n
the element of this string at index idx, where 0 indicates the first element.
IndexOutOfBoundsException if the index is not valid
Cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.
the receiver object.
ClassCastException if the receiver object is not an instance of the erasure of type T0.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this iterable collection should be compared
true, if this iterable collection can possibly equal that, false otherwise. The test takes into consideration only the run-time types of objects but ignores their elements.
Returns this string with first character converted to upper case. If the first character of the string is capitalized, it is returned unchanged. This method does not convert characters outside the Basic Multilingual Plane (BMP).
Builds a new collection by applying a partial function to all elements of this string on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the string.
a new string resulting from applying the given partial function pf to each element on which it is defined and collecting the results. The order of the elements is preserved.
Finds the first element of the traversable or iterator for which the given partial function is defined, and applies the partial function to it.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the partial function
an option value containing pf applied to the first value for which it is defined, or None if none exists.
Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)
Iterates over combinations. A _combination_ of length n is a subsequence of the original sequence, with the elements taken in order. Thus, "xy" and "yy" are both length-2 combinations of "xyy", but "yx" is not. If there is more than one way to generate the same subsequence, only one will be returned.
For example, "xyyy" has three different ways to generate "xy" depending on whether the first, second, or third "y" is selected. However, since all are identical, only one will be chosen. Which of the three will be taken is an implementation detail that is not defined.
An Iterator which traverses the possible n-element combinations of this sequence.
"abbbc".combinations(2) = Iterator(ab, ac, bb, bc)
Result of comparing this with operand that.
Implement this method to determine how instances of A will be sorted.
Returns x where:
x < 0 when this < that
x == 0 when this == that
x > 0 when this > that
Result of comparing this with operand that.
Tests whether this sequence contains a given value as an element.
Note: may not terminate for infinite-sized collections.
the element to test.
true if this sequence has an element that is equal (as determined by ==) to elem, false otherwise.
Tests whether this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
true if this sequence contains a slice with the same elements as that, otherwise false.
Copies the elements of this string to an array. Fills the given array xs with at most len elements of this string, starting at position start. Copying will stop once either the end of the current string is reached, or the end of the target array is reached, or len elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
Copies the elements of this string to an array. Fills the given array xs with values of this string. Copying will stop once either the end of the current string is reached, or the end of the target array is reached.
the array to fill.
Copies the elements of this string to an array. Fills the given array xs with values of this string, beginning at index start. Copying will stop once either the end of the current string is reached, or the end of the target array is reached.
the array to fill.
the starting index.
Copies all elements of this traversable or iterator to a buffer.
Note: will not terminate for infinite-sized collections.
The buffer to which elements are copied.
Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true if both sequences have the same length and p(x, y) is true for all corresponding elements x of this sequence and y of that, otherwise false.
Counts the number of elements in the traversable or iterator which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
Computes the multiset difference between this string and another sequence.
the sequence of elements to remove
a new string which contains all elements of this string except some of occurrences of elements that also appear in that. If an element value x appears n times in that, then the first n occurrences of x will not form part of the result, but any following occurrences will.
Builds a new sequence from this sequence without any duplicate elements.
Note: will not terminate for infinite-sized collections.
A new sequence which contains the first occurrence of every element of this sequence.
Selects all elements except first n ones.
the number of elements to drop from this sequence.
a sequence consisting of all elements of this sequence except the first n ones, or else the empty sequence, if this sequence has less than n elements. If n is negative, don't drop any elements.
Selects all elements except last n ones.
The number of elements to take
a sequence consisting of all elements of this sequence except the last n ones, or else the empty sequence, if this sequence has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
the longest suffix of this sequence whose first element does not satisfy the predicate p.
Tests whether this sequence ends with the given sequence.
the sequence to test
true if this sequence has that as a suffix, false otherwise.
The equals method for arbitrary sequences. Compares this sequence to some other object.
The object to compare the sequence to
true if that is a sequence that has the same elements as this sequence in the same order, false otherwise
Tests whether a predicate holds for at least one element of this sequence.
the predicate used to test elements.
false if this sequence is empty, otherwise true if the given predicate p holds for some of the elements of this sequence, otherwise false
Selects all elements of this traversable collection which satisfy a predicate.
the predicate used to test elements.
a new traversable collection consisting of all elements of this traversable collection that satisfy the given predicate p. The order of the elements is preserved.
Selects all elements of this traversable collection which do not satisfy a predicate.
the predicate used to test elements.
a new traversable collection consisting of all elements of this traversable collection that do not satisfy the given predicate p. The order of the elements is preserved.
Finds the first element of the sequence satisfying a predicate, if any.
the predicate used to test elements.
an option value containing the first element in the sequence that satisfies p, or None if none exists.
Builds a new collection by applying a function to all elements of this string and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of string. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)
// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq)
// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)
// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new string resulting from applying the given collection-valued function f to each element of this string and concatenating the results.
Folds the elements of this traversable or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note: will not terminate for infinite-sized collections.
a type parameter for the binary operator, a supertype of A.
a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation, 0 for addition, or 1 for multiplication).
a binary operator that must be associative.
the result of applying the fold operator op between all the elements and z, or z if this traversable or iterator is empty.
Applies a binary operator to a start value and all elements of this sequence, going left to right.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this sequence, going left to right with the start value z on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x1, ..., xn are the elements of this sequence. Returns z if this sequence is empty.
Applies a binary operator to all elements of this sequence and a start value, going right to left.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this sequence, going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this sequence. Returns z if this sequence is empty.
Tests whether a predicate holds for all elements of this sequence.
the predicate used to test elements.
true if this sequence is empty or the given predicate p holds for all elements of this sequence, otherwise false.
Applies a function f to all elements of this string.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element. The result of function f is discarded.
Uses the underlying string as a pattern (in a fashion similar to printf in C), and uses the supplied arguments to fill in the holes.
The interpretation of the formatting patterns is described in java.util.Formatter, with the addition that classes deriving from ScalaNumber (such as scala.BigInt and scala.BigDecimal) are unwrapped to pass a type which Formatter understands.
the arguments used to instantiating the pattern.
Like format(args*) but takes an initial Locale parameter which influences formatting as in java.lang.String's format.
The interpretation of the formatting patterns is described in java.util.Formatter, with the addition that classes deriving from ScalaNumber (such as scala.BigInt and scala.BigDecimal) are unwrapped to pass a type which Formatter understands.
an instance of java.util.Locale
the arguments used to instantiating the pattern.
Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).
Partitions this traversable collection into a map of traversable collections according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new traversable collection.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to traversable collections such that the following invariant holds:
(xs groupBy f)(k) = xs filter (x => f(x) == k)
That is, every key k is bound to a traversable collection of those elements x for which f(x) equals k.
Partitions elements in fixed size iterable collections.
the number of elements per group
An iterator producing iterable collections of size size, except the last will be less than size size if the elements don't divide evenly.
scala.collection.Iterator, method grouped
Tests whether this traversable collection is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as Stream, the predicate returns true if all elements have been computed. It returns false if the stream is not yet evaluated to the end. Non-empty Iterators usually return false even if they were created from a collection with a known finite size.
Note: many collection methods will not work on collections of infinite sizes. The typical failure mode is an infinite loop. These methods always attempt a traversal without checking first that hasDefiniteSize returns true. However, checking hasDefiniteSize can provide an assurance that size is well-defined and non-termination is not a concern.
true if this collection is known to have finite size, false otherwise.
Hashcodes for IndexedSeq produce a value from the hashcodes of all the elements of the sequence.
the hash code value for this object.
Selects the first element of this sequence.
the first element of this sequence.
NoSuchElementException if the sequence is empty.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this traversable collection if it is nonempty, None if it is empty.
Finds index of first occurrence of some value in this string after or at some start index.
the element value to search for.
the start index
the index >= from of the first element of this string that is equal (as determined by ==) to elem, or -1, if none exists.
Finds index of first occurrence of some value in this string.
the element value to search for.
the index of the first element of this string that is equal (as determined by ==) to elem, or -1, if none exists.
Finds first index after or at a start index where this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
the start index
the first index >= from such that the elements of this sequence starting at this index match the elements of sequence that, or -1 of no such subsequence exists.
Finds first index where this sequence contains a given sequence as a slice.
Note: may not terminate for infinite-sized collections.
the sequence to test
the first index such that the elements of this sequence starting at this index match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index.
the predicate used to test elements.
the start index
the index >= from of the first element of this sequence that satisfies the predicate p, or -1, if none exists.
Finds index of first element satisfying some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the first element of this general sequence that satisfies the predicate p, or -1, if none exists.
Produces the range of all indices of this sequence.
a Range value from 0 to one less than the length of this sequence.
Selects all elements except the last.
a sequence consisting of all elements of this sequence except the last one.
UnsupportedOperationException if the sequence is empty.
Iterates over the inits of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of init.
an iterator over all the inits of this traversable collection
List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)
Computes the multiset intersection between this string and another sequence.
the sequence of elements to intersect with.
a new string which contains all elements of this string which also appear in that. If an element value x appears n times in that, then the first n occurrences of x will be retained in the result, but any following occurrences will be omitted.
Tests whether this general sequence contains given index.
The implementations of methods apply and isDefinedAt turn a Seq[A] into a PartialFunction[Int, A].
the index to test
true if this general sequence contains an element at position idx, false otherwise.
Tests whether this sequence is empty.
true if the sequence contain no elements, false otherwise.
Test whether the dynamic type of the receiver object is T0.
Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.
true if the receiver object is an instance of erasure of type T0; false otherwise.
Tests whether this traversable collection can be repeatedly traversed.
true
Creates a new iterator over all elements contained in this iterable object.
the new iterator
Selects the last element.
The last element of this sequence.
NoSuchElementException If the sequence is empty.
Finds index of last occurrence of some value in this string before or at a given end index.
the element value to search for.
the end index.
the index <= end of the last element of this string that is equal (as determined by ==) to elem, or -1, if none exists.
Finds index of last occurrence of some value in this string.
the element value to search for.
the index of the last element of this string that is equal (as determined by ==) to elem, or -1, if none exists.
Finds last index before or at a given end index where this sequence contains a given sequence as a slice.
the sequence to test
the end index
the last index <= end such that the elements of this sequence starting at this index match the elements of sequence that, or -1 of no such subsequence exists.
Finds last index where this sequence contains a given sequence as a slice.
Note: will not terminate for infinite-sized collections.
the sequence to test
the last index such that the elements of this sequence starting a this index match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end of the last element of this sequence that satisfies the predicate p, or -1, if none exists.
Finds index of last element satisfying some predicate.
Note: will not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the last element of this general sequence that satisfies the predicate p, or -1, if none exists.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this traversable collection$ if it is nonempty, None if it is empty.
The length of the string.
Note: xs.length and xs.size yield the same result.
the number of elements in this string.
IllegalArgumentException if the length of the sequence cannot be represented in an Int, for example, (-1 to Int.MaxValue).length.
Compares the length of this sequence to a test value.
the test value that gets compared with the length.
A value x where
x < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
The method as implemented here does not call length directly; its running time is O(length min len) instead of O(length). The method should be overwritten if computing length is cheap.
Return all lines in this string in an iterator, including trailing line end characters.
This method is analogous to s.split(EOL).toIterator, except that any existing line endings are preserved in the result strings, and the empty string yields an empty iterator.
A line end character is one of
LF - line feed (0x0A)
FF - form feed (0x0C) Builds a new collection by applying a function to all elements of this string.
the element type of the returned collection.
the function to apply to each element.
a new string resulting from applying the given function f to each element of this string and collecting the results.
Finds the largest element.
the largest element of this string.
UnsupportedOperationException if this string is empty.
Finds the first element which yields the largest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this string with the largest value measured by function f.
UnsupportedOperationException if this string is empty.
Finds the smallest element.
the smallest element of this string
UnsupportedOperationException if this string is empty.
Finds the first element which yields the smallest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this string with the smallest value measured by function f.
UnsupportedOperationException if this string is empty.
Displays all elements of this string in a string.
a string representation of this string. In the resulting string the string representations (w.r.t. the method toString) of all elements of this string follow each other without any separator string.
Displays all elements of this traversable or iterator in a string using a separator string.
the separator string.
a string representation of this traversable or iterator. In the resulting string the string representations (w.r.t. the method toString) of all elements of this traversable or iterator are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this traversable or iterator in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this traversable or iterator. The resulting string begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this traversable or iterator are separated by the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Tests whether the traversable or iterator is not empty.
true if the traversable or iterator contains at least one element, false otherwise.
A copy of this string with an element value appended until a given target length is reached.
the target length
the padding value
a new string consisting of all elements of this string followed by the minimal number of occurrences of elem so that the resulting string has a length of at least len.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, par takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par implementation uses the combiner provided by this method to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this traversable collection in two traversable collections according to a predicate.
the predicate on which to partition.
a pair of traversable collections: the first traversable collection consists of all elements that satisfy the predicate p and the second traversable collection consists of all elements that don't. The relative order of the elements in the resulting traversable collections is the same as in the original traversable collection.
Produces a new string where a slice of elements in this string is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original string
a new string consisting of all elements of this string except that replaced elements starting from from are replaced by patch.
Iterates over distinct permutations.
An Iterator which traverses the distinct permutations of this sequence.
"abb".permutations = Iterator(abb, bab, bba)
Returns the length of the longest prefix whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the length of the longest prefix of this general sequence such that every element of the segment satisfies the predicate p.
Multiplies up the elements of this collection.
the product of all elements in this string of numbers of type Int. Instead of Int, any other type T with an implicit Numeric[T] implementation can be used as element type of the string and as result type of product. Examples of such types are: Long, Float, Double, BigInt.
You can follow a string with .r(g1, ... , gn), turning it into a Regex, with group names g1 through gn.
"""(\d\d)-(\d\d)-(\d\d\d\d)""".r("month", "day", "year") matches dates and provides its subcomponents through groups named "month", "day" and "year".
The names of the groups in the pattern, in the order they appear.
You can follow a string with .r, turning it into a Regex. E.g.
"""A\w*""".r is the regular expression for identifiers starting with A.
Reduces the elements of this traversable or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the traversable or iterator is nonempty.
UnsupportedOperationException if this traversable or iterator is empty.
Applies a binary operator to all elements of this sequence, going left to right.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this sequence, going left to right:
op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n)
where x1, ..., xn are the elements of this sequence.
UnsupportedOperationException if this sequence is empty.
Optionally applies a binary operator to all elements of this traversable or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) if this traversable or iterator is nonempty, None otherwise.
Reduces the elements of this traversable or iterator, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this sequence, going right to left.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this sequence, going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))
where x1, ..., xn are the elements of this sequence.
UnsupportedOperationException if this sequence is empty.
Optionally applies a binary operator to all elements of this traversable or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) if this traversable or iterator is nonempty, None otherwise.
Replace all literal occurrences of literal with the literal string replacement. This method is equivalent to java.lang.String#replace.
the string which should be replaced everywhere it occurs
the replacement string
the resulting string
The collection of type traversable collection underlying this TraversableLike object. By default this is implemented as the TraversableLike object itself, but this can be overridden.
Returns new sequence with elements in reversed order.
A new sequence with all elements of this sequence in reversed order.
An iterator yielding elements in reversed order.
Note: xs.reverseIterator is the same as xs.reverse.iterator but might be more efficient.
an iterator yielding the elements of this sequence in reversed order
Builds a new collection by applying a function to all elements of this string and collecting the results in reversed order.
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the element type of the returned collection.
the function to apply to each element.
a new string resulting from applying the given function f to each element of this string and collecting the results in reversed order.
Checks if the other iterable collection contains the same elements in the same order as this string.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new traversable collection containing the prefix scan of the elements in this traversable collection
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and the new element type B.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and the new element type B.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.
Computes length of longest segment whose elements all satisfy some predicate.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this sequence starting from index from such that every element of the segment satisfies the predicate p.
The size of this sequence, equivalent to length.
Note: will not terminate for infinite-sized collections.
the number of elements in this sequence.
The size of this sequence, if it can be cheaply computed
the number of elements in this sequence, or -1 if the size cannot be determined cheaply
Selects an interval of elements. The returned collection is made up of all elements x which satisfy the invariant:
from <= indexOf(x) < until
a string containing the elements greater than or equal to index from extending up to (but not including) index until of this string.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
the distance between the first elements of successive groups
An iterator producing iterable collections of size size, except the last element (which may be the only element) will be truncated if there are fewer than size elements remaining to be grouped.
scala.collection.Iterator, method sliding
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.) The "sliding window" step is set to one.
the number of elements per group
An iterator producing iterable collections of size size, except the last element (which may be the only element) will be truncated if there are fewer than size elements remaining to be grouped.
scala.collection.Iterator, method sliding
Sorts this Seq according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
the target type of the transformation f, and the type where the ordering ord is defined.
the transformation function mapping elements to some other domain B.
the ordering assumed on domain B.
a sequence consisting of the elements of this sequence sorted according to the ordering where x < y if ord.lt(f(x), f(y)).
val words = "The quick brown fox jumped over the lazy dog".split(' ')
// this works because scala.Ordering will implicitly provide an Ordering[Tuple2[Int, Char]]
words.sortBy(x => (x.length, x.head))
res0: Array[String] = Array(The, dog, fox, the, lazy, over, brown, quick, jumped)
scala.math.Ordering Note: will not terminate for infinite-sized collections.
Sorts this sequence according to a comparison function.
Note: will not terminate for infinite-sized collections.
The sort is stable. That is, elements that are equal (as determined by lt) appear in the same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering.
a sequence consisting of the elements of this sequence sorted according to the comparison function lt.
List("Steve", "Tom", "John", "Bob").sortWith(_.compareTo(_) < 0) =
List("Bob", "John", "Steve", "Tom")
Sorts this sequence according to an Ordering.
The sort is stable. That is, elements that are equal (as determined by lt) appear in the same order in the sorted sequence as in the original.
the ordering to be used to compare elements.
a sequence consisting of the elements of this sequence sorted according to the ordering ord.
Splits this sequence into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.
a pair consisting of the longest prefix of this sequence whose elements all satisfy p, and the rest of this sequence.
Split this string around the separator character
If this string is the empty string, returns an array of strings that contains a single empty string.
If this string is not the empty string, returns an array containing the substrings terminated by the start of the string, the end of the string or the separator character, excluding empty trailing substrings
If the separator character is a surrogate character, only split on matching surrogate characters if they are not part of a surrogate pair
The behaviour follows, and is implemented in terms of String.split(re: String)
the character used as a delimiter
"a.b".split('.') //returns Array("a", "b")
//splitting the empty string always returns the array with a single
//empty string
"".split('.') //returns Array("")
//only trailing empty substrings are removed
"a.".split('.') //returns Array("a")
".a.".split('.') //returns Array("", "a")
"..a..".split('.') //returns Array("", "", "a")
//all parts are empty and trailing
".".split('.') //returns Array()
"..".split('.') //returns Array()
//surrogate pairs
val high = 0xD852.toChar
val low = 0xDF62.toChar
val highstring = high.toString
val lowstring = low.toString
//well-formed surrogate pairs are not split
val highlow = highstring + lowstring
highlow.split(high) //returns Array(highlow)
//bare surrogate characters are split
val bare = "_" + highstring + "_"
bare.split(high) //returns Array("_", "_")
Splits this sequence into two at a given position. Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n).
the position at which to split.
a pair of sequences consisting of the first n elements of this sequence, and the other elements.
Tests whether this sequence contains the given sequence at a given index.
Note: If the both the receiver object this and the argument that are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched.
true if the sequence that is contained in this sequence at index offset, otherwise false.
Tests whether this general sequence starts with the given sequence.
the sequence to test
true if this collection has that as a prefix, false otherwise.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString applied to this traversable collection. By default the string prefix is the simple name of the collection class traversable collection.
Strip trailing line end character from this string if it has one.
A line end character is one of
LF - line feed (0x0A hex)
FF - form feed (0x0C hex) If a line feed character LF is preceded by a carriage return CR (0x0D hex), the CR character is also stripped (Windows convention).
For every line in this string:
Strip a leading prefix consisting of blanks or control characters followed by | from the line.
For every line in this string:
Strip a leading prefix consisting of blanks or control characters followed by marginChar from the line.
Returns this string with the given prefix stripped. If this string does not start with prefix, it is returned unchanged.
Returns this string with the given suffix stripped. If this string does not end with suffix, it is returned unchanged.
Sums up the elements of this collection.
the sum of all elements in this string of numbers of type Int. Instead of Int, any other type T with an implicit Numeric[T] implementation can be used as element type of the string and as result type of sum. Examples of such types are: Long, Float, Double, BigInt.
Selects all elements except the first.
a sequence consisting of all elements of this sequence except the first one.
java.lang.UnsupportedOperationException if the sequence is empty.
Iterates over the tails of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of tail.
an iterator over all the tails of this traversable collection
List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)
Selects first n elements.
the number of elements to take from this sequence.
a sequence consisting only of the first n elements of this sequence, or else the whole sequence, if it has less than n elements. If n is negative, returns an empty sequence.
Selects last n elements.
the number of elements to take
a sequence consisting only of the last n elements of this sequence, or else the whole sequence, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
the longest prefix of this sequence whose elements all satisfy the predicate p.
The underlying collection seen as an instance of IndexedSeq. By default this is implemented as the current collection object itself, but this can be overridden.
Converts this string into another by copying all elements.
The collection type to build.
a new collection containing all elements of this string.
Converts this string to an array.
an array containing all elements of this string. An ClassTag must be available for the element type of this string.
java.lang.IllegalArgumentException If the string does not contain a parsable Boolean.
Uses the contents of this sequence to create a new mutable buffer.
a buffer containing all elements of this sequence.
Parse as a Byte (string must contain only decimal digits and optional leading -).
java.lang.NumberFormatException If the string does not contain a parsable Byte.
A conversion from collections of type Repr to IndexedSeq objects. By default this is implemented as just a cast, but this can be overridden.
Parse as a Double (surrounding whitespace is removed with a trim).
java.lang.NullPointerException If the string is null.
java.lang.NumberFormatException If the string does not contain a parsable Double.
Parse as a Float (surrounding whitespace is removed with a trim).
java.lang.NullPointerException If the string is null.
java.lang.NumberFormatException If the string does not contain a parsable Float.
Converts this traversable or iterator to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this traversable or iterator.
Parse as an Int (string must contain only decimal digits and optional leading -).
java.lang.NumberFormatException If the string does not contain a parsable Int.
Returns this iterable collection as an iterable collection.
A new collection will not be built; lazy collections will stay lazy.
Note: will not terminate for infinite-sized collections.
an Iterable containing all elements of this iterable collection.
Returns an Iterator over the elements in this iterable collection. Produces the same result as iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this iterable collection.
Converts this sequence to a list.
a list containing all elements of this sequence.
Parse as a Long (string must contain only decimal digits and optional leading -).
java.lang.NumberFormatException If the string does not contain a parsable Long.
Converts this string to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map of type immutable.Map[T, U] containing all key/value pairs of type (T, U) of this string.
Converts this sequence to a sequence.
Note: will not terminate for infinite-sized collections.
A new collection will not be built; in particular, lazy sequences will stay lazy.
a sequence containing all elements of this sequence.
Converts this traversable or iterator to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this traversable or iterator.
Parse as a Short (string must contain only decimal digits and optional leading -).
java.lang.NumberFormatException If the string does not contain a parsable Short.
Converts this iterable collection to a stream.
a stream containing all elements of this iterable collection.
Converts this sequence to a string.
a string representation of this collection. By default this string consists of the stringPrefix of this sequence, followed by all elements separated by commas and enclosed in parentheses.
Converts this traversable collection to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this traversable collection.
Converts this traversable or iterator to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this traversable or iterator.
Produces a new sequence which contains all elements of this string and also all elements of a given sequence. xs union ys is equivalent to xs ++ ys.
Another way to express this is that xs union ys computes the order-preserving multi-set union of xs and ys. union is hence a counter-part of diff and intersect which also work on multi-sets.
the sequence to add.
a new string which contains all elements of this string followed by all elements of that.
A copy of this string with one single replaced element.
the position of the replacement
the replacing element
a copy of this string with the element at position index replaced by elem.
Creates a non-strict view of a slice of this sequence.
Note: the difference between view and slice is that view produces a view of the current sequence, whereas slice produces a new sequence.
Note: view(from, to) is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this sequence, starting at index from and extending up to (but not including) index until.
Creates a non-strict view of this sequence.
a non-strict view of this sequence.
Creates a non-strict filter of this traversable collection.
Note: the difference between c filter p and c withFilter p is that the former creates a new collection, whereas the latter only restricts the domain of subsequent map, flatMap, foreach, and withFilter operations.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an object of class WithFilter, which supports map, flatMap, foreach, and withFilter operations. All these operations apply to those elements of this traversable collection which satisfy the predicate p.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new string containing pairs consisting of corresponding elements of this string and that. The length of the returned collection is the minimum of the lengths of this string and that.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this string is shorter than that.
the element to be used to fill up the result if that is shorter than this string.
a new string containing pairs consisting of corresponding elements of this string and that. The length of the returned collection is the maximum of the lengths of this string and that. If this string is shorter than that, thisElem values are used to pad the result. If that is shorter than this string, thatElem values are used to pad the result.
Zips this string with its indices.
A new string containing pairs consisting of all elements of this string paired with their index. Indices start at 0.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Returns true if this is less than that
(stringLike: math.Ordered[StringLike[Repr]]).<(that)
Returns true if this is less than or equal to that.
(stringLike: math.Ordered[StringLike[Repr]]).<=(that)
Returns true if this is greater than that.
(stringLike: math.Ordered[StringLike[Repr]]).>(that)
Returns true if this is greater than or equal to that.
(stringLike: math.Ordered[StringLike[Repr]]).>=(that)
Result of comparing this with operand that.
Implement this method to determine how instances of A will be sorted.
Returns x where:
x < 0 when this < that
x == 0 when this == that
x > 0 when this > that
(stringLike: math.Ordered[StringLike[Repr]]).compare(that)
Result of comparing this with operand that.
(stringLike: math.Ordered[StringLike[Repr]]).compareTo(that)
(stringLike: MonadOps[Char]).filter(p)
(stringLike: MonadOps[Char]).flatMap(f)
(stringLike: MonadOps[Char]).map(f)
(stringLike: MonadOps[Char]).withFilter(p)
© 2002-2019 EPFL, with contributions from Lightbend.
Licensed under the Apache License, Version 2.0.
https://www.scala-lang.org/api/2.12.9/scala/collection/immutable/StringLike.html
A trait describing stringlike collections.
The type of the actual collection inheriting
StringLike.2.8