W3cubDocs

/OpenJDK 8

Class Throwable

All Implemented Interfaces:
Serializable
Direct Known Subclasses:
Error, Exception
public class Throwable
extends Object
implements Serializable

The Throwable class is the superclass of all errors and exceptions in the Java language. Only objects that are instances of this class (or one of its subclasses) are thrown by the Java Virtual Machine or can be thrown by the Java throw statement. Similarly, only this class or one of its subclasses can be the argument type in a catch clause. For the purposes of compile-time checking of exceptions, Throwable and any subclass of Throwable that is not also a subclass of either RuntimeException or Error are regarded as checked exceptions.

Instances of two subclasses, Error and Exception, are conventionally used to indicate that exceptional situations have occurred. Typically, these instances are freshly created in the context of the exceptional situation so as to include relevant information (such as stack trace data).

A throwable contains a snapshot of the execution stack of its thread at the time it was created. It can also contain a message string that gives more information about the error. Over time, a throwable can suppress other throwables from being propagated. Finally, the throwable can also contain a cause: another throwable that caused this throwable to be constructed. The recording of this causal information is referred to as the chained exception facility, as the cause can, itself, have a cause, and so on, leading to a "chain" of exceptions, each caused by another.

One reason that a throwable may have a cause is that the class that throws it is built atop a lower layered abstraction, and an operation on the upper layer fails due to a failure in the lower layer. It would be bad design to let the throwable thrown by the lower layer propagate outward, as it is generally unrelated to the abstraction provided by the upper layer. Further, doing so would tie the API of the upper layer to the details of its implementation, assuming the lower layer's exception was a checked exception. Throwing a "wrapped exception" (i.e., an exception containing a cause) allows the upper layer to communicate the details of the failure to its caller without incurring either of these shortcomings. It preserves the flexibility to change the implementation of the upper layer without changing its API (in particular, the set of exceptions thrown by its methods).

A second reason that a throwable may have a cause is that the method that throws it must conform to a general-purpose interface that does not permit the method to throw the cause directly. For example, suppose a persistent collection conforms to the Collection interface, and that its persistence is implemented atop java.io. Suppose the internals of the add method can throw an IOException. The implementation can communicate the details of the IOException to its caller while conforming to the Collection interface by wrapping the IOException in an appropriate unchecked exception. (The specification for the persistent collection should indicate that it is capable of throwing such exceptions.)

A cause can be associated with a throwable in two ways: via a constructor that takes the cause as an argument, or via the initCause(Throwable) method. New throwable classes that wish to allow causes to be associated with them should provide constructors that take a cause and delegate (perhaps indirectly) to one of the Throwable constructors that takes a cause. Because the initCause method is public, it allows a cause to be associated with any throwable, even a "legacy throwable" whose implementation predates the addition of the exception chaining mechanism to Throwable.

By convention, class Throwable and its subclasses have two constructors, one that takes no arguments and one that takes a String argument that can be used to produce a detail message. Further, those subclasses that might likely have a cause associated with them should have two more constructors, one that takes a Throwable (the cause), and one that takes a String (the detail message) and a Throwable (the cause).

Since:
JDK1.0

Constructors

Throwable

public Throwable()

Constructs a new throwable with null as its detail message. The cause is not initialized, and may subsequently be initialized by a call to initCause(java.lang.Throwable).

The fillInStackTrace() method is called to initialize the stack trace data in the newly created throwable.

Throwable

public Throwable(String message)

Constructs a new throwable with the specified detail message. The cause is not initialized, and may subsequently be initialized by a call to initCause(java.lang.Throwable).

The fillInStackTrace() method is called to initialize the stack trace data in the newly created throwable.

Parameters:
message - the detail message. The detail message is saved for later retrieval by the getMessage() method.

Throwable

public Throwable(String message,
                 Throwable cause)

Constructs a new throwable with the specified detail message and cause.

Note that the detail message associated with cause is not automatically incorporated in this throwable's detail message.

The fillInStackTrace() method is called to initialize the stack trace data in the newly created throwable.

Parameters:
message - the detail message (which is saved for later retrieval by the getMessage() method).
cause - the cause (which is saved for later retrieval by the getCause() method). (A null value is permitted, and indicates that the cause is nonexistent or unknown.)
Since:
1.4

Throwable

public Throwable(Throwable cause)

Constructs a new throwable with the specified cause and a detail message of (cause==null ? null : cause.toString()) (which typically contains the class and detail message of cause). This constructor is useful for throwables that are little more than wrappers for other throwables (for example, PrivilegedActionException).

The fillInStackTrace() method is called to initialize the stack trace data in the newly created throwable.

Parameters:
cause - the cause (which is saved for later retrieval by the getCause() method). (A null value is permitted, and indicates that the cause is nonexistent or unknown.)
Since:
1.4

Throwable

protected Throwable(String message,
                    Throwable cause,
                    boolean enableSuppression,
                    boolean writableStackTrace)

Constructs a new throwable with the specified detail message, cause, suppression enabled or disabled, and writable stack trace enabled or disabled. If suppression is disabled, getSuppressed() for this object will return a zero-length array and calls to addSuppressed(java.lang.Throwable) that would otherwise append an exception to the suppressed list will have no effect. If the writable stack trace is false, this constructor will not call fillInStackTrace(), a null will be written to the stackTrace field, and subsequent calls to fillInStackTrace and setStackTrace(StackTraceElement[]) will not set the stack trace. If the writable stack trace is false, getStackTrace() will return a zero length array.

Note that the other constructors of Throwable treat suppression as being enabled and the stack trace as being writable. Subclasses of Throwable should document any conditions under which suppression is disabled and document conditions under which the stack trace is not writable. Disabling of suppression should only occur in exceptional circumstances where special requirements exist, such as a virtual machine reusing exception objects under low-memory situations. Circumstances where a given exception object is repeatedly caught and rethrown, such as to implement control flow between two sub-systems, is another situation where immutable throwable objects would be appropriate.

Parameters:
message - the detail message.
cause - the cause. (A null value is permitted, and indicates that the cause is nonexistent or unknown.)
enableSuppression - whether or not suppression is enabled or disabled
writableStackTrace - whether or not the stack trace should be writable
Since:
1.7
See Also:
OutOfMemoryError, NullPointerException, ArithmeticException

Methods

getMessage

public String getMessage()

Returns the detail message string of this throwable.

Returns:
the detail message string of this Throwable instance (which may be null).

getLocalizedMessage

public String getLocalizedMessage()

Creates a localized description of this throwable. Subclasses may override this method in order to produce a locale-specific message. For subclasses that do not override this method, the default implementation returns the same result as getMessage().

Returns:
The localized description of this throwable.
Since:
JDK1.1

getCause

public Throwable getCause()

Returns the cause of this throwable or null if the cause is nonexistent or unknown. (The cause is the throwable that caused this throwable to get thrown.)

This implementation returns the cause that was supplied via one of the constructors requiring a Throwable, or that was set after creation with the initCause(Throwable) method. While it is typically unnecessary to override this method, a subclass can override it to return a cause set by some other means. This is appropriate for a "legacy chained throwable" that predates the addition of chained exceptions to Throwable. Note that it is not necessary to override any of the PrintStackTrace methods, all of which invoke the getCause method to determine the cause of a throwable.

Returns:
the cause of this throwable or null if the cause is nonexistent or unknown.
Since:
1.4

initCause

public Throwable initCause(Throwable cause)

Initializes the cause of this throwable to the specified value. (The cause is the throwable that caused this throwable to get thrown.)

This method can be called at most once. It is generally called from within the constructor, or immediately after creating the throwable. If this throwable was created with Throwable(Throwable) or Throwable(String,Throwable), this method cannot be called even once.

An example of using this method on a legacy throwable type without other support for setting the cause is:

try {
     lowLevelOp();
 } catch (LowLevelException le) {
     throw (HighLevelException)
           new HighLevelException().initCause(le); // Legacy constructor
 }
Parameters:
cause - the cause (which is saved for later retrieval by the getCause() method). (A null value is permitted, and indicates that the cause is nonexistent or unknown.)
Returns:
a reference to this Throwable instance.
Throws:
IllegalArgumentException - if cause is this throwable. (A throwable cannot be its own cause.)
IllegalStateException - if this throwable was created with Throwable(Throwable) or Throwable(String,Throwable), or this method has already been called on this throwable.
Since:
1.4

toString

public String toString()

Returns a short description of this throwable. The result is the concatenation of:

  • the name of the class of this object
  • ": " (a colon and a space)
  • the result of invoking this object's getLocalizedMessage() method
If getLocalizedMessage returns null, then just the class name is returned.
Overrides:
toString in class Object
Returns:
a string representation of this throwable.

printStackTrace

public void printStackTrace()

Prints this throwable and its backtrace to the standard error stream. This method prints a stack trace for this Throwable object on the error output stream that is the value of the field System.err. The first line of output contains the result of the toString() method for this object. Remaining lines represent data previously recorded by the method fillInStackTrace(). The format of this information depends on the implementation, but the following example may be regarded as typical:

java.lang.NullPointerException
        at MyClass.mash(MyClass.java:9)
        at MyClass.crunch(MyClass.java:6)
        at MyClass.main(MyClass.java:3)
This example was produced by running the program:
class MyClass {
     public static void main(String[] args) {
         crunch(null);
     }
     static void crunch(int[] a) {
         mash(a);
     }
     static void mash(int[] b) {
         System.out.println(b[0]);
     }
 }
The backtrace for a throwable with an initialized, non-null cause should generally include the backtrace for the cause. The format of this information depends on the implementation, but the following example may be regarded as typical:
HighLevelException: MidLevelException: LowLevelException
         at Junk.a(Junk.java:13)
         at Junk.main(Junk.java:4)
 Caused by: MidLevelException: LowLevelException
         at Junk.c(Junk.java:23)
         at Junk.b(Junk.java:17)
         at Junk.a(Junk.java:11)
         ... 1 more
 Caused by: LowLevelException
         at Junk.e(Junk.java:30)
         at Junk.d(Junk.java:27)
         at Junk.c(Junk.java:21)
         ... 3 more
Note the presence of lines containing the characters "...". These lines indicate that the remainder of the stack trace for this exception matches the indicated number of frames from the bottom of the stack trace of the exception that was caused by this exception (the "enclosing" exception). This shorthand can greatly reduce the length of the output in the common case where a wrapped exception is thrown from same method as the "causative exception" is caught. The above example was produced by running the program:
public class Junk {
     public static void main(String args[]) {
         try {
             a();
         } catch(HighLevelException e) {
             e.printStackTrace();
         }
     }
     static void a() throws HighLevelException {
         try {
             b();
         } catch(MidLevelException e) {
             throw new HighLevelException(e);
         }
     }
     static void b() throws MidLevelException {
         c();
     }
     static void c() throws MidLevelException {
         try {
             d();
         } catch(LowLevelException e) {
             throw new MidLevelException(e);
         }
     }
     static void d() throws LowLevelException {
        e();
     }
     static void e() throws LowLevelException {
         throw new LowLevelException();
     }
 }

 class HighLevelException extends Exception {
     HighLevelException(Throwable cause) { super(cause); }
 }

 class MidLevelException extends Exception {
     MidLevelException(Throwable cause)  { super(cause); }
 }

 class LowLevelException extends Exception {
 }
As of release 7, the platform supports the notion of suppressed exceptions (in conjunction with the try-with-resources statement). Any exceptions that were suppressed in order to deliver an exception are printed out beneath the stack trace. The format of this information depends on the implementation, but the following example may be regarded as typical:
Exception in thread "main" java.lang.Exception: Something happened
  at Foo.bar(Foo.java:10)
  at Foo.main(Foo.java:5)
  Suppressed: Resource$CloseFailException: Resource ID = 0
          at Resource.close(Resource.java:26)
          at Foo.bar(Foo.java:9)
          ... 1 more
Note that the "... n more" notation is used on suppressed exceptions just at it is used on causes. Unlike causes, suppressed exceptions are indented beyond their "containing exceptions."

An exception can have both a cause and one or more suppressed exceptions:

Exception in thread "main" java.lang.Exception: Main block
  at Foo3.main(Foo3.java:7)
  Suppressed: Resource$CloseFailException: Resource ID = 2
          at Resource.close(Resource.java:26)
          at Foo3.main(Foo3.java:5)
  Suppressed: Resource$CloseFailException: Resource ID = 1
          at Resource.close(Resource.java:26)
          at Foo3.main(Foo3.java:5)
 Caused by: java.lang.Exception: I did it
  at Foo3.main(Foo3.java:8)
Likewise, a suppressed exception can have a cause:
Exception in thread "main" java.lang.Exception: Main block
  at Foo4.main(Foo4.java:6)
  Suppressed: Resource2$CloseFailException: Resource ID = 1
          at Resource2.close(Resource2.java:20)
          at Foo4.main(Foo4.java:5)
  Caused by: java.lang.Exception: Rats, you caught me
          at Resource2$CloseFailException.<init>(Resource2.java:45)
          ... 2 more

printStackTrace

public void printStackTrace(PrintStream s)

Prints this throwable and its backtrace to the specified print stream.

Parameters:
s - PrintStream to use for output

printStackTrace

public void printStackTrace(PrintWriter s)

Prints this throwable and its backtrace to the specified print writer.

Parameters:
s - PrintWriter to use for output
Since:
JDK1.1

fillInStackTrace

public Throwable fillInStackTrace()

Fills in the execution stack trace. This method records within this Throwable object information about the current state of the stack frames for the current thread.

If the stack trace of this Throwable is not writable, calling this method has no effect.

Returns:
a reference to this Throwable instance.
See Also:
printStackTrace()

getStackTrace

public StackTraceElement[] getStackTrace()

Provides programmatic access to the stack trace information printed by printStackTrace(). Returns an array of stack trace elements, each representing one stack frame. The zeroth element of the array (assuming the array's length is non-zero) represents the top of the stack, which is the last method invocation in the sequence. Typically, this is the point at which this throwable was created and thrown. The last element of the array (assuming the array's length is non-zero) represents the bottom of the stack, which is the first method invocation in the sequence.

Some virtual machines may, under some circumstances, omit one or more stack frames from the stack trace. In the extreme case, a virtual machine that has no stack trace information concerning this throwable is permitted to return a zero-length array from this method. Generally speaking, the array returned by this method will contain one element for every frame that would be printed by printStackTrace. Writes to the returned array do not affect future calls to this method.

Returns:
an array of stack trace elements representing the stack trace pertaining to this throwable.
Since:
1.4

setStackTrace

public void setStackTrace(StackTraceElement[] stackTrace)

Sets the stack trace elements that will be returned by getStackTrace() and printed by printStackTrace() and related methods. This method, which is designed for use by RPC frameworks and other advanced systems, allows the client to override the default stack trace that is either generated by fillInStackTrace() when a throwable is constructed or deserialized when a throwable is read from a serialization stream.

If the stack trace of this Throwable is not writable, calling this method has no effect other than validating its argument.

Parameters:
stackTrace - the stack trace elements to be associated with this Throwable. The specified array is copied by this call; changes in the specified array after the method invocation returns will have no affect on this Throwable's stack trace.
Throws:
NullPointerException - if stackTrace is null or if any of the elements of stackTrace are null
Since:
1.4

addSuppressed

public final void addSuppressed(Throwable exception)

Appends the specified exception to the exceptions that were suppressed in order to deliver this exception. This method is thread-safe and typically called (automatically and implicitly) by the try-with-resources statement.

The suppression behavior is enabled unless disabled via a constructor. When suppression is disabled, this method does nothing other than to validate its argument.

Note that when one exception causes another exception, the first exception is usually caught and then the second exception is thrown in response. In other words, there is a causal connection between the two exceptions. In contrast, there are situations where two independent exceptions can be thrown in sibling code blocks, in particular in the try block of a try-with-resources statement and the compiler-generated finally block which closes the resource. In these situations, only one of the thrown exceptions can be propagated. In the try-with-resources statement, when there are two such exceptions, the exception originating from the try block is propagated and the exception from the finally block is added to the list of exceptions suppressed by the exception from the try block. As an exception unwinds the stack, it can accumulate multiple suppressed exceptions.

An exception may have suppressed exceptions while also being caused by another exception. Whether or not an exception has a cause is semantically known at the time of its creation, unlike whether or not an exception will suppress other exceptions which is typically only determined after an exception is thrown.

Note that programmer written code is also able to take advantage of calling this method in situations where there are multiple sibling exceptions and only one can be propagated.

Parameters:
exception - the exception to be added to the list of suppressed exceptions
Throws:
IllegalArgumentException - if exception is this throwable; a throwable cannot suppress itself.
NullPointerException - if exception is null
Since:
1.7

getSuppressed

public final Throwable[] getSuppressed()

Returns an array containing all of the exceptions that were suppressed, typically by the try-with-resources statement, in order to deliver this exception. If no exceptions were suppressed or suppression is disabled, an empty array is returned. This method is thread-safe. Writes to the returned array do not affect future calls to this method.

Returns:
an array containing all of the exceptions that were suppressed to deliver this exception.
Since:
1.7

© 1993–2017, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from Debian's OpenJDK Development Kit package.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Various third party code in OpenJDK is licensed under different licenses (see Debian package).
Java and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.