The mariabackup SST method uses the Mariabackup utility for performing SSTs. It is one of the methods that does not block the donor node. Mariabackup was originally forked from Percona XtraBackup, and similarly, the mariabackup SST method was originally forked from the xtrabackup-v2 SST method.

Note that if you use the mariabackup SST method, then you also need to have socat installed on the server. This is needed to stream the backup from the donor node to the joiner node. This is a limitation that was inherited from the xtrabackup-v2 SST method.

Choosing Mariabackup for SSTs

To use the mariabackup SST method, you must set the wsrep_sst_method=mariabackup on both the donor and joiner node. It can be changed dynamically with SET GLOBAL on the node that you intend to be a SST donor. For example:

SET GLOBAL wsrep_sst_method='mariabackup';

It can be set in a server option group in an option file prior to starting up a node:

[mariadb]
...
wsrep_sst_method = mariabackup

Authentication and Privileges

To use the mariabackup SST method, Mariabackup needs to be able to authenticate locally on the donor node, so that it can create a backup to stream to the joiner. You can tell the donor node what username and password to use by setting the wsrep_sst_auth system variable. It can be changed dynamically with SET GLOBAL on the node that you intend to be a SST donor. For example:

SET GLOBAL wsrep_sst_auth = 'mariabackup:mypassword';

It can also be set in a server option group in an option file prior to starting up a node:

[mariadb]
...
wsrep_sst_auth = mariabackup:mypassword

Some authentication plugins do not require a password. For example, the unix_socket and gssapi authentication plugins do not require a password. If you are using a user account that does not require a password in order to log in, then you can just leave the password component of wsrep_sst_auth empty. For example:

[mariadb]
...
wsrep_sst_auth = mariabackup:

The user account that performs the backup for the SST needs to have the same privileges as Mariabackup, which are the RELOAD , PROCESS, LOCK TABLES and REPLICATION CLIENT global privileges. To be safe, you should ensure that these privileges are set on each node in your cluster. Mariabackup connects locally on the donor node to perform the backup, so the following user should be sufficient:

CREATE USER 'mariabackup'@'localhost' IDENTIFIED BY 'mypassword';
GRANT RELOAD, PROCESS, LOCK TABLES, REPLICATION CLIENT ON *.* TO 'mariabackup'@'localhost';

Passwordless Authentication - Unix Socket

It is possible to use the unix_socket authentication plugin for the user account that performs SSTs. This would provide the benefit of not needing to configure a plain-text password in wsrep_sst_auth.

The user account would have to have the same name as the operating system user account that is running the mysqld process. On many systems, this is the user account configured as the user option, and it tends to default to mysql.

For example, if the unix_socket authentication plugin is already installed, then you could execute the following to create the user account:

CREATE USER 'mysql'@'localhost' IDENTIFIED VIA unix_socket;
GRANT RELOAD, PROCESS, LOCK TABLES, REPLICATION CLIENT ON *.* TO 'mysql'@'localhost';

And then to configure wsrep_sst_auth, you could set the following in a server option group in an option file prior to starting up a node:

[mariadb]
...
wsrep_sst_auth = mysql:

Passwordless Authentication - GSSAPI

It is possible to use the gssapi authentication plugin for the user account that performs SSTs. This would provide the benefit of not needing to configure a plain-text password in wsrep_sst_auth.

The following steps would need to be done beforehand:

• You need a KDC running MIT Kerberos or Microsoft Active Directory.
• You will need to create a keytab file for the MariaDB server.
• You will need to install the package containing the gssapi authentication plugin.
• You will need to install the plugin in MariaDB, so that the gssapi authentication plugin is available to use.
• You will need to configure the plugin.
• You will need to create a user account that authenticates with the gssapi authentication plugin, so that the user account can be used for SSTs. This user account will need to correspond with a user account that exists on the backend KDC.

For example, you could execute the following to create the user account in MariaDB:

CREATE USER 'mariabackup'@'localhost' IDENTIFIED VIA gssapi;
GRANT RELOAD, PROCESS, LOCK TABLES, REPLICATION CLIENT ON *.* TO 'mariabackup'@'localhost';

And then to configure wsrep_sst_auth, you could set the following in a server option group in an option file prior to starting up a node:

[mariadb]
...
wsrep_sst_auth = mariabackup:

Socat Dependency

During the SST process, the donor node uses socat to stream the backup to the joiner node. Then the joiner node prepares the backup before restoring it. The socat utility must be installed on both the donor node and the joiner node in order for this to work. Otherwise, the MariaDB error log will contain an error like:

WSREP_SST: [ERROR] socat not found in path: /usr/sbin:/sbin:/usr//bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin (20180122 14:55:32.993)

Installing Socat on RHEL/CentOS

On RHEL/CentOS, socat can be installed from the Extra Packages for Enterprise Linux (EPEL) repository.

TLS

This SST method supports two different TLS methods. The specific method can be selected by setting the encrypt option in the [sst] section of the MariaDB configuration file. The options are:

• TLS using OpenSSL encryption built into socat (encrypt=2)
• TLS using OpenSSL encryption with Galera-compatible certificates and keys (encrypt=3)

Note that encrypt=1 refers to a TLS encryption method that has been deprecated and removed. encrypt=4 refers to a TLS encryption method in xtrabackup-v2 that has not yet been ported to mariabackup. See MDEV-18050 about that.

TLS Using OpenSSL Encryption Built into Socat

To generate keys compatible with this encryption method, you can follow these directions.

For example:

• First, generate the keys and certificates:

FILENAME=sst
openssl genrsa -out $FILENAME.key 1024
openssl req -new -key $FILENAME.key -x509 -days 3653 -out $FILENAME.crt
cat $FILENAME.key $FILENAME.crt >$FILENAME.pem
chmod 600 $FILENAME.key $FILENAME.pem

• On some systems, you may also have to add dhparams to the certificate:

openssl dhparam -out dhparams.pem 2048
cat dhparams.pem >> sst.pem

• Then, copy the certificate and keys to all nodes in the cluster.

• Then, configure the following on all nodes in the cluster:

[sst]
encrypt=2
tca=/etc/my.cnf.d/certificates/sst.crt
tcert=/etc/my.cnf.d/certificates/sst.pem

But replace the paths with whatever is relevant on your system.

This should allow your SSTs to be encrypted.

TLS Using OpenSSL Encryption with Galera-compatible Certificates and Keys

To generate keys compatible with this encryption method, you can follow these directions.

For example:

• First, generate the keys and certificates:

# CA
openssl genrsa 2048 > ca-key.pem
openssl req -new -x509 -nodes -days 365000 \
-key ca-key.pem -out ca-cert.pem
 
# server1
openssl req -newkey rsa:2048 -days 365000 \
-nodes -keyout server1-key.pem -out server1-req.pem
openssl rsa -in server1-key.pem -out server1-key.pem
openssl x509 -req -in server1-req.pem -days 365000 \
-CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 \
-out server1-cert.pem

• Then, copy the certificate and keys to all nodes in the cluster.

• Then, configure the following on all nodes in the cluster:

[sst]
encrypt=3
tkey=/etc/my.cnf.d/certificates/server1-key.pem
tcert=/etc/my.cnf.d/certificates/server1-cert.pem

But replace the paths with whatever is relevant on your system.

This should allow your SSTs to be encrypted.

Logs

The mariabackup SST method has its own logging outside of the MariaDB Server logging.

Logging to SST Logs

[sst]
sst-log-archive=1
sst-log-archive-dir=/var/log/mysql/sst/

Logging to Syslog

You can redirect the SST logs to the syslog instead by setting the following in the [sst] option group in an option file:

[sst]
sst-syslog=1

Performing SSTs with IPv6 Addresses

If you are performing Mariabackup SSTs with IPv6 addresses, then the socat utility needs to be passed the pf=ip6 option. This can be done by setting the sockopt option in the [sst] option group in an option file. For example:

[sst]
sockopt=",pf=ip6"

See MDEV-18797 for more information.

Manual SST with Mariabackup

In some cases, if Galera Cluster's automatic SSTs repeatedly fail, then it can be helpful to perform a "manual SST". See the following page on how to do that:

• Manual SST of Galera Cluster node with Mariabackup

See Also

• Percona XtraBackup SST Configuration
• Encrypting PXC Traffic: ENCRYPTING SST TRAFFIC
• XTRABACKUP PARAMETERS
• SSL FOR STATE SNAPSHOT TRANSFERS: ENABLING SSL FOR XTRABACKUP