| Parameter | Choices/Defaults | Comments |
|---|---|---|
| checksum string added in 2.8 | If a checksum is passed to this parameter, the digest of the destination file will be calculated after it is downloaded to ensure its integrity and verify that the transfer completed successfully. This option cannot be set with checksum_url. | |
| checksum_algorithm string added in 2.8 |
| Specifies the hashing algorithm used when calculating the checksum of the remote and destination file. |
| checksum_url string added in 2.8 | Specifies a URL that contains the checksum values for the resource at url. Like checksum, this is used to verify the integrity of the remote transfer.This option cannot be set with checksum. | |
| client_cert string added in 2.9 | The path to the client certificate (.pfx) that is used for X509 authentication. This path can either be the path to the pfx on the filesystem or the PowerShell certificate path Cert:\CurrentUser\My\<thumbprint>.The WinRM connection must be authenticated with CredSSP or become is used on the task if the certificate file is not password protected.Other authentication types can set client_cert_password when the cert is password protected. | |
| client_cert_password string added in 2.9 | The password for client_cert if the cert is password protected. | |
| dest path / required | The location to save the file at the URL. Be sure to include a filename and extension as appropriate. | |
| follow_redirects string added in 2.9 |
| Whether or the module should follow redirects. all will follow all redirect.none will not follow any redirect.safe will follow only "safe" redirects, where "safe" means that the client is only doing a GET or HEAD on the URI to which it is being redirected. |
| force boolean |
| If yes, will download the file every time and replace the file if the contents change. If no, will only download the file if it does not exist or the remote file has been modified more recently than the local file.This works by sending an http HEAD request to retrieve last modified time of the requested resource, so for this to work, the remote web server must support HEAD requests. |
| force_basic_auth boolean added in 2.5 |
| By default the authentication header is only sent when a webservice responses to an initial request with a 401 status. Since some basic auth services do not properly send a 401, logins will fail. This option forces the sending of the Basic authentication header upon the original request. |
| headers dictionary added in 2.4 | Extra headers to set on the request. This should be a dictionary where the key is the header name and the value is the value for that header. | |
| http_agent string added in 2.9 | Default: "ansible-httpget" | Header to identify as, generally appears in web server logs. This is set to the User-Agent header on a HTTP request. |
| maximum_redirection integer added in 2.9 | Default: 50 | Specify how many times the module will redirect a connection to an alternative URI before the connection fails. If set to 0 or follow_redirects is set to none, or safe when not doing a GET or HEAD it prevents all redirection. |
| method string added in 2.9 | This option is not for use with win_get_url and should be ignored. | |
| proxy_password string | The password for proxy_username. | |
| proxy_url string | An explicit proxy to use for the request. By default, the request will use the IE defined proxy unless use_proxy is set to no. | |
| proxy_use_default_credential boolean added in 2.9 |
| Uses the current user's credentials when authenticating with a proxy host protected with NTLM, Kerberos, or Negotiate authentication.Proxies that use Basic auth will still require explicit credentials through the proxy_username and proxy_password options.The module will only have access to the user's credentials if using become with a password, you are connecting with SSH using a password, or connecting with WinRM using CredSSP or Kerberos with delegation.If not using become or a different auth method to the ones stated above, there will be no default credentials available and no proxy authentication will occur. |
| proxy_username string | The username to use for proxy authentication. | |
| timeout integer added in 2.4 | Default: 30 | Specifies how long the request can be pending before it times out (in seconds). Set to 0 to specify an infinite timeout. |
| url string / required | The full URL of a file to download. | |
| url_password string | The password for url_username. aliases: password | |
| url_username string | The username to use for authentication. aliases: user, username | |
| use_default_credential boolean added in 2.9 |
| Uses the current user's credentials when authenticating with a server protected with NTLM, Kerberos, or Negotiate authentication.Sites that use Basic auth will still require explicit credentials through the url_username and url_password options.The module will only have access to the user's credentials if using become with a password, you are connecting with SSH using a password, or connecting with WinRM using CredSSP or Kerberos with delegation.If not using become or a different auth method to the ones stated above, there will be no default credentials available and no authentication will occur. |
| use_proxy boolean added in 2.4 |
| If no, it will not use the proxy defined in IE for the current user. |
| validate_certs boolean added in 2.4 |
| If no, SSL certificates will not be validated.This should only be used on personally controlled sites using self-signed certificates. |
Note
force=yes. This is to better align with get_url.See also
- name: Download earthrise.jpg to specified path
win_get_url:
url: http://www.example.com/earthrise.jpg
dest: C:\Users\RandomUser\earthrise.jpg
- name: Download earthrise.jpg to specified path only if modified
win_get_url:
url: http://www.example.com/earthrise.jpg
dest: C:\Users\RandomUser\earthrise.jpg
force: no
- name: Download earthrise.jpg to specified path through a proxy server.
win_get_url:
url: http://www.example.com/earthrise.jpg
dest: C:\Users\RandomUser\earthrise.jpg
proxy_url: http://10.0.0.1:8080
proxy_username: username
proxy_password: password
- name: Download file from FTP with authentication
win_get_url:
url: ftp://server/file.txt
dest: '%TEMP%\ftp-file.txt'
url_username: ftp-user
url_password: ftp-password
- name: Download src with sha256 checksum url
win_get_url:
url: http://www.example.com/earthrise.jpg
dest: C:\temp\earthrise.jpg
checksum_url: http://www.example.com/sha256sum.txt
checksum_algorithm: sha256
force: True
- name: Download src with sha256 checksum url
win_get_url:
url: http://www.example.com/earthrise.jpg
dest: C:\temp\earthrise.jpg
checksum: a97e6837f60cec6da4491bab387296bbcd72bdba
checksum_algorithm: sha1
force: True
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| checksum_dest string | success and dest has been downloaded | <algorithm> checksum of the file after the download Sample: 6e642bb8dd5c2e027bf21dd923337cbb4214f827 |
| checksum_src string | force=yes or dest did not exist | <algorithm> checksum of the remote resource Sample: 6e642bb8dd5c2e027bf21dd923337cbb4214f827 |
| dest string | always | destination file/path Sample: C:\Users\RandomUser\earthrise.jpg |
| elapsed float | always | The elapsed seconds between the start of poll and the end of the module. Sample: 2.1406487 |
| msg string | always | Error message, or HTTP status message from web-server Sample: OK |
| size integer | success | size of the dest file Sample: 1220 |
| status_code integer | always | HTTP status code Sample: 200 |
| url string | always | requested url Sample: http://www.example.com/earthrise.jpg |
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/win_get_url_module.html