W3cubDocs

vyos_lldp_interfaces – Manages attributes of lldp interfaces on VyOS devices

New in version 2.9.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis

This module manages attributes of lldp interfaces on VyOS network devices.

Parameters

Parameter					Choices/Defaults	Comments
config list						A list of lldp interfaces configurations.
	enable boolean				Choices: no yes ←	to disable lldp on the interface.
	location dictionary					LLDP-MED location data.
		civic_based dictionary				Civic-based location data.
			ca_info list			LLDP-MED address info
				ca_type integer / required		LLDP-MED Civic Address type.
				ca_value string / required		LLDP-MED Civic Address value.
			country_code string / required			Country Code
		coordinate_based dictionary				Coordinate-based location.
			altitude integer			Altitude in meters.
			datum string		Choices: WGS84 NAD83 MLLW	Coordinate datum type.
			latitude string / required			Latitude.
			longitude string / required			Longitude.
		elin string				Emergency Call Service ELIN number (between 10-25 numbers).
	name string / required					Name of the lldp interface.
state string					Choices: merged ← replaced overridden deleted	The state of the configuration after module completion.

Notes

Note

Tested against VyOS 1.1.8 (helium).
This module works with connection network_cli. See the VyOS OS Platform Options.

Examples

# Using merged
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep lldp
#
- name: Merge provided configuration with device configuration
  vyos_lldp_interfaces:
    config:
      - name: 'eth1'
        location:
          civic_based:
            country_code: 'US'
            ca_info:
              - ca_type: 0
                ca_value: 'ENGLISH'

      - name: 'eth2'
        location:
          coordinate_based:
           altitude: 2200
           datum: 'WGS84'
           longitude: '222.267255W'
           latitude: '33.524449N'
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
#    "commands": [
#        "set service lldp interface eth1 location civic-based country-code 'US'",
#        "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
#        "set service lldp interface eth1",
#        "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth2 location coordinate-based altitude '2200'",
#        "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
#        "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth2 location coordinate-based altitude '2200'",
#        "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
#        "set service lldp interface eth2"
#
# "after": [
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth1"
#        }
#    ],
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'


# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Replace device configurations of listed LLDP interfaces with provided configurations
  vyos_lldp_interfaces:
    config:
      - name: 'eth2'
        location:
          civic_based:
            country_code: 'US'
            ca_info:
              - ca_type: 0
                ca_value: 'ENGLISH'

      - name: 'eth1'
        location:
          coordinate_based:
           altitude: 2200
           datum: 'WGS84'
           longitude: '222.267255W'
           latitude: '33.524449N'
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
#    "commands": [
#        "delete service lldp interface eth2 location",
#        "set service lldp interface eth2 'disable'",
#        "set service lldp interface eth2 location civic-based country-code 'US'",
#        "set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'",
#        "delete service lldp interface eth1 location",
#        "set service lldp interface eth1 'disable'",
#        "set service lldp interface eth1 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth1 location coordinate-based altitude '2200'",
#        "set service lldp interface eth1 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth1 location coordinate-based longitude '222.267255W'"
#    ]
#
#    "after": [
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
#
- name: Overrides all device configuration with provided configuration
  vyos_lag_interfaces:
    config:
     - name: 'eth2'
       location:
         elin: 0000000911

    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
#        {
#            "enable": false,
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "enable": false,
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
#    "commands": [
#        "delete service lldp interface eth2 location",
#        "delete service lldp interface eth2 disable",
#        "set service lldp interface eth2 location elin 0000000911"
#
#
#    "after": [
#        {
#            "location": {
#                "elin": 0000000911
#            },
#            "name": "eth2"
#        }
#    ]
#
#
# After state
# ------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'


# Using deleted
#
# Before state
# -------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
#
- name: Delete lldp  interface attributes of given interfaces.
  vyos_lag_interfaces:
    config:
     - name: 'eth2'
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
    "before": [
        {
            "location": {
                "elin": 0000000911
            },
            "name": "eth2"
        }
    ]
# "commands": [
#    "commands": [
#        "delete service lldp interface eth2"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep lldp
# set service 'lldp'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

Rohit Thakur (@rohitthakur2590)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vyos_lldp_interfaces_module.html