W3cubDocs

vyos_lag_interfaces – Manages attributes of link aggregation groups on VyOS network devices

New in version 2.9.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis

This module manages attributes of link aggregation groups on VyOS network devices.

Parameters

Parameter			Choices/Defaults	Comments
config list				A list of link aggregation group configurations.
	arp_monitor dictionary			ARP Link monitoring parameters.
		interval integer		ARP link monitoring frequency in milliseconds.
		target list		IP address to use for ARP monitoring.
	hash_policy string		Choices: layer2 layer2+3 layer3+4	LAG or bonding transmit hash policy.
	members list			List of member interfaces for the LAG (bond).
		member string		Name of the member interface.
	mode string		Choices: 802.3ad active-backup broadcast round-robin transmit-load-balance adaptive-load-balance xor-hash	LAG or bond mode.
	name string / required			Name of the link aggregation group (LAG) or bond.
	primary string			Primary device interfaces for the LAG (bond).
state string			Choices: merged ← replaced overridden deleted	The state of the configuration after module completion.

Notes

Note

Tested against VyOS 1.1.8 (helium).
This module works with connection network_cli. See the VyOS OS Platform Options.

Examples

# Using merged
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3
#
- name: Merge provided configuration with device configuration
  vyos_lag_interfaces:
    config:
      - name: bond2
        mode: active-backup
        members:
         - member: eth2
         - member: eth1
        hash_policy: layer2
        primary: eth2

      - name: 'bond3'
        mode: 'active-backup'
        hash_policy: 'layer2+3'
        members:
         - member: eth3
        primary: 'eth3'
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "name": "bond2"
#        },
#        {
#            "name": "bond3"
#        }
#    ],
#
# "commands": [
#        "set interfaces bonding bond2 hash-policy 'layer2'",
#        "set interfaces bonding bond2 mode 'active-backup'",
#        "set interfaces ethernet eth2 bond-group bond2",
#        "set interfaces ethernet eth1 bond-group bond2",
#        "set interfaces bonding bond2 primary 'eth2'",
#        "set interfaces bonding bond3 hash-policy 'layer2+3'",
#        "set interfaces bonding bond3 mode 'active-backup'",
#        "set interfaces ethernet eth3 bond-group bond3",
#        "set interfaces bonding bond3 primary 'eth3'"
#    ]
#
#     "after": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Replace device configurations of listed LAGs with provided configurations
  vyos_lag_interfaces:
    config:
      - name: bond3
        mode: '802.3ad'
        hash_policy: 'layer2'
        members:
         - member: eth3
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
#
# "commands": [
#        "delete interfaces bonding bond3 primary",
#        "set interfaces bonding bond3 hash-policy 'layer2'",
#        "set interfaces bonding bond3 mode '802.3ad'"
#    ],
#
# "after": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "802.3ad",
#            "name": "bond3"
#        }
#    ],
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode '802.3ad'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode '802.3ad'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Overrides all device configuration with provided configuration
  vyos_lag_interfaces:
    config:
      - name: bond3
        mode: active-backup
        members:
         - member: eth1
         - member: eth2
         - member: eth3
        primary: eth3
        hash_policy: layer2
    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "802.3ad",
#            "name": "bond3"
#        }
#    ],
#
#    "commands": [
#        "delete interfaces bonding bond2 hash-policy",
#        "delete interfaces ethernet eth1 bond-group bond2",
#        "delete interfaces ethernet eth2 bond-group bond2",
#        "delete interfaces bonding bond2 mode",
#        "delete interfaces bonding bond2 primary",
#        "set interfaces bonding bond3 mode 'active-backup'",
#        "set interfaces ethernet eth1 bond-group bond3",
#        "set interfaces ethernet eth2 bond-group bond3",
#        "set interfaces bonding bond3 primary 'eth3'"
#    ],
#
# "after": [
#        {
#            "name": "bond2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                },
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
#
#
# After state
# ------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond3'
# set interfaces ethernet eth2 bond-group 'bond3'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using deleted
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Delete LAG attributes of given interfaces (Note This won't delete the interface itself)
  vyos_lag_interfaces:
    config:
      - name: bond2
      - name: bond3
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
# "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
# "commands": [
#        "delete interfaces bonding bond2 hash-policy",
#        "delete interfaces ethernet eth1 bond-group bond2",
#        "delete interfaces ethernet eth2 bond-group bond2",
#        "delete interfaces bonding bond2 mode",
#        "delete interfaces bonding bond2 primary",
#        "delete interfaces bonding bond3 hash-policy",
#        "delete interfaces ethernet eth3 bond-group bond3",
#        "delete interfaces bonding bond3 mode",
#        "delete interfaces bonding bond3 primary"
#    ],
#
# "after": [
#        {
#            "name": "bond2"
#        },
#        {
#            "name": "bond3"
#        }
#    ],
#
# After state
# ------------
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['set interfaces bonding bond2', 'set interfaces bonding bond2 hash-policy layer2']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

Rohit Thakur (@rohitthakur2590)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vyos_lag_interfaces_module.html