W3cubDocs

/Ansible 2.9

os_router – Create or delete routers from OpenStack

Synopsis

  • Create or Delete routers from OpenStack. Although Neutron allows routers to share the same name, this module enforces name uniqueness to be more user friendly.

Requirements

The below requirements are needed on the host that executes this module.

  • openstacksdk
  • openstacksdk >= 0.12.0
  • python >= 2.7

Parameters

Parameter Choices/Defaults Comments
admin_state_up
boolean
    Choices:
  • no
  • yes ←
Desired admin state of the created or existing router.
api_timeout
integer
How long should the socket layer wait before timing out for API calls. If this is omitted, nothing will be passed to the requests library.
auth
dictionary
Dictionary containing auth information as needed by the cloud's auth plugin strategy. For the default password plugin, this would contain auth_url, username, password, project_name and any information about domains (for example, os_user_domain_name or os_project_domain_name) if the cloud supports them. For other plugins, this param will need to contain whatever parameters that auth plugin requires. This parameter is not needed if a named cloud is provided or OpenStack OS_* environment variables are present.
auth_type
string
Name of the auth plugin to use. If the cloud uses something other than password authentication, the name of the plugin should be indicated here and the contents of the auth parameter should be updated accordingly.
availability_zone
-
Ignored. Present for backwards compatibility
ca_cert
string
A path to a CA Cert bundle that can be used as part of verifying SSL API requests.

aliases: cacert
client_cert
string
A path to a client certificate to use as part of the SSL transaction.

aliases: cert
client_key
string
A path to a client key to use as part of the SSL transaction.

aliases: key
cloud
raw
Named cloud or cloud config to operate against. If cloud is a string, it references a named cloud config as defined in an OpenStack clouds.yaml file. Provides default values for auth and auth_type. This parameter is not needed if auth is provided or if OpenStack OS_* environment variables are present. If cloud is a dict, it contains a complete cloud configuration like would be in a section of clouds.yaml.
enable_snat
boolean
    Choices:
  • no
  • yes
Enable Source NAT (SNAT) attribute.
external_fixed_ips
-
The IP address parameters for the external gateway network. Each is a dictionary with the subnet name or ID (subnet) and the IP address to assign on the subnet (ip). If no IP is specified, one is automatically assigned from that subnet.
interface
string
    Choices:
  • admin
  • internal
  • public ←
Endpoint URL type to fetch from the service catalog.

aliases: endpoint_type
interfaces
-
List of subnets to attach to the router internal interface. Default gateway associated with the subnet will be automatically attached with the router's internal interface. In order to provide an ip address different from the default gateway,parameters are passed as dictionary with keys as network name or ID(net), subnet name or ID (subnet) and the IP of port (portip) from the network. User defined portip is often required when a multiple router need to be connected to a single subnet for which the default gateway has been already used.
name
- / required
Name to be give to the router
network
-
Unique name or ID of the external gateway network.
required interfaces or enable_snat are provided.
project
-
Unique name or ID of the project.
region_name
string
Name of the region.
state
-
    Choices:
  • present ←
  • absent
Indicate desired state of the resource
timeout
integer
Default:
180
How long should ansible wait for the requested resource.
validate_certs
boolean
    Choices:
  • no ←
  • yes
Whether or not SSL API requests should be verified.
Before Ansible 2.3 this defaulted to yes.

aliases: verify
wait
boolean
    Choices:
  • no
  • yes ←
Should ansible wait until the requested resource is complete.

Notes

Note

  • The standard OpenStack environment variables, such as OS_USERNAME may be used instead of providing explicit values.
  • Auth information is driven by openstacksdk, which means that values can come from a yaml config file in /etc/ansible/openstack.yaml, /etc/openstack/clouds.yaml or ~/.config/openstack/clouds.yaml, then from standard environment variables, then finally by explicit parameters in plays. More information can be found at https://docs.openstack.org/openstacksdk/

Examples

# Create a simple router, not attached to a gateway or subnets.
- os_router:
    cloud: mycloud
    state: present
    name: simple_router

# Create a simple router, not attached to a gateway or subnets for a given project.
- os_router:
    cloud: mycloud
    state: present
    name: simple_router
    project: myproj

# Creates a router attached to ext_network1 on an IPv4 subnet and one
# internal subnet interface.
- os_router:
    cloud: mycloud
    state: present
    name: router1
    network: ext_network1
    external_fixed_ips:
      - subnet: public-subnet
        ip: 172.24.4.2
    interfaces:
      - private-subnet

# Create another router with two internal subnet interfaces.One with user defined port
# ip and another with default gateway.
- os_router:
    cloud: mycloud
    state: present
    name: router2
    network: ext_network1
    interfaces:
      - net: private-net
        subnet: private-subnet
        portip: 10.1.1.10
      - project-subnet

# Create another router with two internal subnet interface.One with user defined port
# ip and and another with default gateway.
- os_router:
    cloud: mycloud
    state: present
    name: router2
    network: ext_network1
    interfaces:
      - net: private-net
        subnet: private-subnet
        portip: 10.1.1.10
      - project-subnet

# Create another router with two internal subnet interface. one with  user defined port
# ip and and another  with default gateway.
- os_router:
    cloud: mycloud
    state: present
    name: router2
    network: ext_network1
    interfaces:
      - net: private-net
        subnet: private-subnet
        portip: 10.1.1.10
      - project-subnet

# Update existing router1 external gateway to include the IPv6 subnet.
# Note that since 'interfaces' is not provided, any existing internal
# interfaces on an existing router will be left intact.
- os_router:
    cloud: mycloud
    state: present
    name: router1
    network: ext_network1
    external_fixed_ips:
      - subnet: public-subnet
        ip: 172.24.4.2
      - subnet: ipv6-public-subnet
        ip: 2001:db8::3

# Delete router1
- os_router:
    cloud: mycloud
    state: absent
    name: router1

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
router
complex
On success when state is 'present'
Dictionary describing the router.
admin_state_up
boolean
Administrative state of the router.

Sample:
True
external_gateway_info
dictionary
The external gateway parameters.

Sample:
{'enable_snat': True, 'external_fixed_ips': [{'ip_address': '10.6.6.99', 'subnet_id': '4272cb52-a456-4c20-8f3c-c26024ecfa81'}]}
id
string
Router ID.

Sample:
474acfe5-be34-494c-b339-50f06aa143e4
name
string
Router name.

Sample:
router1
routes
list
The extra routes configuration for L3 router.
status
string
The router status.

Sample:
ACTIVE
tenant_id
string
The tenant ID.

Sample:
861174b82b43463c9edc5202aadc60ef


Status

Authors

  • David Shrewsbury (@Shrews)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/os_router_module.html