New in version 2.8.
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
mrouter - | Configure ip igmp snooping mrouter port on vlan | ||
name - / required | Configure mrouter interface | ||
state - |
| Enable IGMP snooping mrouter on vlan interface. | |
querier - | Configure the IGMP querier parameters | ||
address - | Update IP address for the querier | ||
interval - | Update time interval between querier queries, range 60-600 | ||
state - |
| Enable IGMP snooping querier on vlan in the switch. | |
state - |
| IGMP state. | |
static_groups - | List of IGMP static groups. | ||
multicast_ip_address - / required | Configure static IP multicast group, range 224.0.1.0-239.255.255.25. | ||
name - | interface name to configure static groups on it. | ||
sources - | List of IP sources to be configured | ||
version - |
| IGMP snooping operation version on this vlan | |
vlan_id - / required | VLAN ID, vlan should exist. |
Note
- name: configure igmp vlan onyx_igmp_vlan: state: enabled vlan_id: 10 version: V2 querier: state: enabled interval: 70 address: 10.11.121.13 mrouter: state: disabled name: Eth1/2 static_groups: - multicast_ip_address: 224.5.5.8 name: Eth1/1 sources: - 1.1.1.1 - 1.1.1.2
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list | always | The list of configuration mode commands to send to the device. Sample: ['vlan 10 ip igmp snooping', 'vlan 10 ip igmp snooping static-group 224.5.5.5 interface ethernet 1/1'] |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/onyx_igmp_vlan_module.html