New in version 2.4.
| Removed in Ansible: | |
|---|---|
| version: 2.13 | |
| Why: | Updated modules released with more functionality |
| Alternative: | Use platform-specific “[netos]_l3_interfaces” module |
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| aggregate - | List of L3 interfaces definitions | |
| ipv4 - | IPv4 of the L3 interface. | |
| ipv6 - | IPv6 of the L3 interface. | |
| name - | Name of the L3 interface. | |
| purge - | Default: "no" | Purge L3 interfaces not defined in the aggregate parameter. |
| state - |
| State of the L3 interface configuration. |
Note
ansible_network_os network platforms. See the Network Platform Options for details.- name: Set eth0 IPv4 address
net_l3_interface:
name: eth0
ipv4: 192.168.0.1/24
- name: Remove eth0 IPv4 address
net_l3_interface:
name: eth0
state: absent
- name: Set IP addresses on aggregate
net_l3_interface:
aggregate:
- { name: eth1, ipv4: 192.168.2.10/24 }
- { name: eth2, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
- name: Remove IP addresses on aggregate
net_l3_interface:
aggregate:
- { name: eth1, ipv4: 192.168.2.10/24 }
- { name: eth2, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list | always, except for the platforms that use Netconf transport to manage the device. | The list of configuration mode commands to send to the device Sample: ["set interfaces ethernet eth0 address '192.168.0.1/24'"] |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/net_l3_interface_module.html