New in version 2.4.
| Removed in Ansible: | |
|---|---|
| version: 2.13 | |
| Why: | Updated modules released with more functionality |
| Alternative: | Use platform-specific “[netos]_l2_interfaces” module |
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| access_vlan - | Configure given VLAN in access port. | |
| aggregate - | List of Layer-2 interface definitions. | |
| mode - |
| Mode in which interface needs to be configured. |
| name - | Name of the interface excluding any logical unit number. | |
| native_vlan - | Native VLAN to be configured in trunk port. | |
| state - |
| State of the Layer-2 Interface configuration. |
| trunk_allowed_vlans - | List of allowed VLAN's in a given trunk port. | |
| trunk_vlans - | List of VLANs to be configured in trunk port. |
Note
ansible_network_os network platforms. See the Network Platform Options for details.- name: configure Layer-2 interface
net_l2_interface:
name: gigabitethernet0/0/1
mode: access
access_vlan: 30
- name: remove Layer-2 interface configuration
net_l2_interface:
name: gigabitethernet0/0/1
state: absent
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list | always, except for the platforms that use Netconf transport to manage the device. | The list of configuration mode commands to send to the device Sample: ['interface gigabitethernet0/0/1', 'switchport mode access', 'switchport access vlan 30'] |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/net_l2_interface_module.html