New in version 2.4.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| active boolean |
| Specifies whether or not the configuration is active or deactivated | |
| aggregate - | The set of VRF definition objects to be configured on the remote JUNOS device. Ths list entries can either be the VRF name or a hash of VRF definitions and attributes. This argument is mutually exclusive with the name argument. | ||
| description - | Provides a short description of the VRF definition in the current active configuration. The VRF definition value accepts alphanumeric characters used to provide additional information about the VRF. | ||
| interfaces - | Identifies the set of interfaces that should be configured in the VRF. Interfaces must be routed interfaces in order to be placed into a VRF. | ||
| name - | The name of the VRF definition to be managed on the remote IOS device. The VRF definition name is an ASCII string name used to uniquely identify the VRF. This argument is mutually exclusive with the aggregate argument | ||
| provider dictionary | Deprecated Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.For more information please see the Junos OS Platform Options guide. A dict object containing connection details. | ||
| host string / required | Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. | ||
| password string | Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead. | ||
| port integer | Default: 22 | Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device. | |
| ssh_keyfile path | Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead. | ||
| timeout integer | Default: 10 | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | |
| username string | Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead. | ||
| rd - | The router-distinguisher value uniquely identifies the VRF to routing processes on the remote IOS system. The RD value takes the form of A:B where A and B are both numeric values. | ||
| state - |
| Configures the state of the VRF definition as it relates to the device operational configuration. When set to present, the VRF should be configured in the device active configuration and when set to absent the VRF should not be in the device active configuration | |
| table_label boolean |
| Causes JUNOS to allocate a VPN label per VRF rather than per VPN FEC. This allows for forwarding of traffic to directly connected subnets, COS Egress filtering etc. | |
| target - | It configures VRF target community configuration. The target value takes the form of target:A:B where A and B are both numeric values. | ||
Note
netconf. See the Junos OS Platform Options.local connections for legacy playbooks.- name: Configure vrf configuration
junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
state: present
- name: Remove vrf configuration
junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
state: absent
- name: Deactivate vrf configuration
junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
active: False
- name: Activate vrf configuration
junos_vrf:
name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
active: True
- name: Create vrf using aggregate
junos_vrf:
aggregate:
- name: test-1
description: test-vrf-1
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 192.0.2.1:10
target: target:65514:113
- name: test-2
description: test-vrf-2
interfaces:
- ge-0/0/4
- ge-0/0/5
rd: 192.0.2.2:10
target: target:65515:114
state: present
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| diff.prepared string | when configuration is changed and diff option is enabled. | Configuration difference before and after applying change. Sample: [edit routing-instances] + test-1 { + description test-vrf-1; + instance-type vrf; + interface ge-0/0/2.0; + interface ge-0/0/3.0; + route-distinguisher 192.0.2.1:10; + vrf-target target:65514:113; + } |
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/junos_vrf_module.html