W3cubDocs

ios_lldp_interfaces – Manage link layer discovery protocol (LLDP) attributes of interfaces on Cisco IOS devices

New in version 2.9.

Synopsis
Parameters
Notes
Examples
Return Values
Status

Synopsis

This module manages link layer discovery protocol (LLDP) attributes of interfaces on Cisco IOS devices.

Parameters

Parameter			Choices/Defaults	Comments
config list / elements=dictionary				A dictionary of LLDP options
	med_tlv_select dictionary			Selection of LLDP MED TLVs to send NOTE, if med-tlv-select is configured idempotency won't be maintained as Cisco device doesn't record configured med-tlv-select options. As such, Ansible cannot verify if the respective med-tlv-select options is already configured or not from the device side. If you try to apply med-tlv-select option in every play run, Ansible will show changed as True.
		inventory_management boolean	Choices: no yes	LLDP MED Inventory Management TLV
	name string / required			Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
	receive boolean		Choices: no yes	Enable LLDP reception on interface.
	tlv_select dictionary			Selection of LLDP type-length-value i.e. TLVs to send NOTE, if tlv-select is configured idempotency won't be maintained as Cisco device doesn't record configured tlv-select options. As such, Ansible cannot verify if the respective tlv-select options is already configured or not from the device side. If you try to apply tlv-select option in every play run, Ansible will show changed as True.
		power_management boolean	Choices: no yes	IEEE 802.3 DTE Power via MDI TLV
	transmit boolean		Choices: no yes	Enable LLDP transmission on interface.
state string			Choices: merged ← replaced overridden deleted	The state of the configuration after module completion

Notes

Note

Tested against Cisco IOSv Version 15.2 on VIRL
This module works with connection network_cli, See IOS Platform Options.

Examples

# Using merged
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

- name: Merge provided configuration with device configuration
  ios_lldp_interfaces:
    config:
      - name: GigabitEthernet0/1
        receive: True
        transmit: True
      - name: GigabitEthernet0/2
        receive: True
      - name: GigabitEthernet0/3
        transmit: True
    state: merged

# After state:
# ------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

# Using overridden
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

- name: Override device configuration of all lldp_interfaces with provided configuration
  ios_lldp_interfaces:
    config:
      - name: GigabitEthernet0/2
        receive: True
        transmit: True
    state: overridden

# After state:
# ------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME

# Using replaced
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

- name: Replaces device configuration of listed lldp_interfaces with provided configuration
  ios_lldp_interfaces:
    config:
      - name: GigabitEthernet0/2
        receive: True
        transmit: True
      - name: GigabitEthernet0/3
        receive: True
    state: replaced

# After state:
# ------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: disabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

# Using Deleted
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

- name: "Delete LLDP attributes of given interfaces (Note: This won't delete the interface itself)"
  ios_lldp_interfaces:
    config:
      - name: GigabitEthernet0/1
    state: deleted

# After state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

# Using Deleted without any config passed
# "(NOTE: This will delete all of configured LLDP module attributes)"
#
# Before state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: enabled
#    Rx: enabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

- name: "Delete LLDP attributes for all configured interfaces (Note: This won't delete the interface itself)"
  ios_lldp_interfaces:
    state: deleted

# After state:
# -------------
#
# vios#sh lldp interface
# GigabitEthernet0/0:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/1:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#
# GigabitEthernet0/2:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: INIT
#
# GigabitEthernet0/3:
#    Tx: disabled
#    Rx: disabled
#    Tx state: IDLE
#    Rx state: WAIT FOR FRAME
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['interface GigabitEthernet 0/1', 'lldp transmit', 'lldp receive']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

Sumit Jaiswal (@justjais)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ios_lldp_interfaces_module.html