New in version 2.8.
| Parameter | Choices/Defaults | Comments | |||
|---|---|---|---|---|---|
| config - | Specifies the BGP related configuration. | ||||
| address_family - | Specifies BGP address family related configurations. | ||||
| afi - / required |
| Type of address family to configure. | |||
| auto_summary boolean |
| Enable/disable automatic network number summarization. | |||
| neighbors - | Specifies BGP neighbor related configurations in Address Family configuration mode. | ||||
| activate boolean |
| Enable the Address Family for this Neighbor. | |||
| advertisement_interval integer | Minimum interval between sending BGP routing updates for this neighbor. | ||||
| maximum_prefix integer | Maximum number of prefixes to accept from this peer. The range is from 1 to 2147483647. | ||||
| neighbor - / required | Neighbor router address. | ||||
| next_hop_self boolean |
| Enable/disable the next hop calculation for this neighbor. | |||
| next_hop_unchanged boolean |
| Propagate next hop unchanged for iBGP paths to this neighbor. | |||
| remove_private_as boolean |
| Remove the private AS number from outbound updates. | |||
| route_reflector_client boolean |
| Specify a neighbor as a route reflector client. | |||
| route_server_client boolean |
| Specify a neighbor as a route server client. | |||
| networks - | Specify Networks to announce via BGP. For operation replace, this option is mutually exclusive with root level networks option. | ||||
| masklen - | Subnet mask length for the Network to announce(e.g, 8, 16, 24, etc.). | ||||
| prefix - / required | Network ID to announce via BGP. | ||||
| route_map - | Route map to modify the attributes. | ||||
| redistribute - | Specifies the redistribute information from another routing protocol. | ||||
| id - | Identifier for the routing protocol for configuring redistribute information. Valid for protocols 'ospf', 'ospfv3' and 'eigrp'. | ||||
| metric - | Specifies the metric for redistributed routes. | ||||
| protocol - / required |
| Specifies the protocol for configuring redistribute information. | |||
| route_map - | Specifies the route map reference. | ||||
| safi - |
| Specifies the type of cast for the address family. | |||
| synchronization boolean |
| Enable/disable IGP synchronization. | |||
| bgp_as integer / required | Specifies the BGP Autonomous System (AS) number to configure on the device. | ||||
| log_neighbor_changes boolean |
| Enable/disable logging neighbor up/down and reset reason. | |||
| neighbors - | Specifies BGP neighbor related configurations. | ||||
| description - | Neighbor specific description. | ||||
| ebgp_multihop integer | Specifies the maximum hop count for EBGP neighbors not on directly connected networks. The range is from 1 to 255. | ||||
| enabled boolean |
| Administratively shutdown or enable a neighbor. | |||
| local_as integer | The local AS number for the neighbor. | ||||
| neighbor - / required | Neighbor router address. | ||||
| password - | Password to authenticate the BGP peer connection. | ||||
| peer_group - | Name of the peer group that the neighbor is a member of. | ||||
| remote_as integer / required | Remote AS of the BGP neighbor to configure. | ||||
| timers - | Specifies BGP neighbor timer related configurations. | ||||
| holdtime integer / required | Interval (in seconds) after not receiving a keepalive message that IOS declares a peer dead. The range is from 0 to 65535. | ||||
| keepalive integer / required | Frequency (in seconds) with which the device sends keepalive messages to its peer. The range is from 0 to 65535. | ||||
| min_neighbor_holdtime integer | Interval (in seconds) specifying the minimum acceptable hold-time from a BGP neighbor. The minimum acceptable hold-time must be less than, or equal to, the interval specified in the holdtime argument. The range is from 0 to 65535. | ||||
| update_source - | Source of the routing updates. | ||||
| networks - | Specify Networks to announce via BGP. For operation replace, this option is mutually exclusive with networks option under address_family. For operation replace, if the device already has an address family activated, this option is not allowed. | ||||
| masklen - | Subnet mask length for the Network to announce(e.g, 8, 16, 24, etc.). | ||||
| prefix - / required | Network ID to announce via BGP. | ||||
| route_map - | Route map to modify the attributes. | ||||
| router_id - | Default: null | Configures the BGP routing process router-id value. | |||
| operation - |
| Specifies the operation to be performed on the BGP process configured on the device. In case of merge, the input configuration will be merged with the existing BGP configuration on the device. In case of replace, if there is a diff between the existing configuration and the input configuration, the existing configuration will be replaced by the input configuration for every option that has the diff. In case of override, all the existing BGP configuration will be removed from the device and replaced with the input configuration. In case of delete the existing BGP configuration will be removed from the device. | |||
Note
- name: configure global bgp as 64496
ios_bgp:
config:
bgp_as: 64496
router_id: 192.0.2.1
log_neighbor_changes: True
neighbors:
- neighbor: 203.0.113.5
remote_as: 64511
timers:
keepalive: 300
holdtime: 360
min_neighbor_holdtime: 360
- neighbor: 198.51.100.2
remote_as: 64498
networks:
- prefix: 198.51.100.0
route_map: RMAP_1
- prefix: 192.0.2.0
masklen: 23
address_family:
- afi: ipv4
safi: unicast
redistribute:
- protocol: ospf
id: 223
metric: 10
operation: merge
- name: Configure BGP neighbors
ios_bgp:
config:
bgp_as: 64496
neighbors:
- neighbor: 192.0.2.10
remote_as: 64496
password: ansible
description: IBGP_NBR_1
ebgp_multihop: 100
timers:
keepalive: 300
holdtime: 360
min_neighbor_holdtime: 360
- neighbor: 192.0.2.15
remote_as: 64496
description: IBGP_NBR_2
ebgp_multihop: 150
operation: merge
- name: Configure root-level networks for BGP
ios_bgp:
config:
bgp_as: 64496
networks:
- prefix: 203.0.113.0
masklen: 27
route_map: RMAP_1
- prefix: 203.0.113.32
masklen: 27
route_map: RMAP_2
operation: merge
- name: Configure BGP neighbors under address family mode
ios_bgp:
config:
bgp_as: 64496
address_family:
- afi: ipv4
safi: unicast
neighbors:
- neighbor: 203.0.113.10
activate: yes
maximum_prefix: 250
advertisement_interval: 120
- neighbor: 192.0.2.15
activate: yes
route_reflector_client: True
operation: merge
- name: remove bgp as 64496 from config
ios_bgp:
config:
bgp_as: 64496
operation: delete
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands list | always | The list of configuration mode commands to send to the device Sample: ['router bgp 64496', 'bgp router-id 192.0.2.1', 'bgp log-neighbor-changes', 'neighbor 203.0.113.5 remote-as 64511', 'neighbor 203.0.113.5 timers 300 360 360', 'neighbor 198.51.100.2 remote-as 64498', 'network 198.51.100.0 route-map RMAP_1', 'network 192.0.2.0 mask 255.255.254.0', 'address-family ipv4', 'redistribute ospf 223 metric 70', 'exit-address-family'] |
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ios_bgp_module.html