New in version 2.8.
The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
host string | FortiOS or FortiGate IP address. | |||
https boolean |
| Indicates if the requests towards FortiGate must use HTTPS protocol. | ||
password string | Default: "" | FortiOS or FortiGate password. | ||
ssl_verify boolean added in 2.9 |
| Ensures FortiGate certificate must be verified by a proper CA. | ||
state string added in 2.9 |
| Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level. | ||
username string | FortiOS or FortiGate username. | |||
vdom string | Default: "root" | Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. | ||
vpn_ipsec_phase1 dictionary | Default: null | Configure VPN remote gateway. | ||
acct_verify string |
| Enable/disable verification of RADIUS accounting record. | ||
add_gw_route string |
| Enable/disable automatically add a route to the remote gateway. | ||
add_route string |
| Enable/disable control addition of a route to peer destination selector. | ||
assign_ip string |
| Enable/disable assignment of IP to IPsec interface via configuration method. | ||
assign_ip_from string |
| Method by which the IP address will be assigned. | ||
authmethod string |
| Authentication method. | ||
authmethod_remote string |
| Authentication method (remote side). | ||
authpasswd string | XAuth password (max 35 characters). | |||
authusr string | XAuth user name. | |||
authusrgrp string | Authentication user group. Source user.group.name. | |||
auto_negotiate string |
| Enable/disable automatic initiation of IKE SA negotiation. | ||
backup_gateway list | Instruct unity clients about the backup gateway address(es). | |||
address string / required | Address of backup gateway. | |||
banner string | Message that unity client should display after connecting. | |||
cert_id_validation string |
| Enable/disable cross validation of peer ID and the identity in the peer's certificate as specified in RFC 4945. | ||
certificate list | Names of up to 4 signed personal certificates. | |||
name string / required | Certificate name. Source vpn.certificate.local.name. | |||
childless_ike string |
| Enable/disable childless IKEv2 initiation (RFC 6023). | ||
client_auto_negotiate string |
| Enable/disable allowing the VPN client to bring up the tunnel when there is no traffic. | ||
client_keep_alive string |
| Enable/disable allowing the VPN client to keep the tunnel up when there is no traffic. | ||
comments string | Comment. | |||
dhgrp string |
| DH group. | ||
digital_signature_auth string |
| Enable/disable IKEv2 Digital Signature Authentication (RFC 7427). | ||
distance integer | Distance for routes added by IKE (1 - 255). | |||
dns_mode string |
| DNS server mode. | ||
domain string | Instruct unity clients about the default DNS domain. | |||
dpd string |
| Dead Peer Detection mode. | ||
dpd_retrycount integer | Number of DPD retry attempts. | |||
dpd_retryinterval string | DPD retry interval. | |||
eap string |
| Enable/disable IKEv2 EAP authentication. | ||
eap_identity string |
| IKEv2 EAP peer identity type. | ||
enforce_unique_id string |
| Enable/disable peer ID uniqueness check. | ||
forticlient_enforcement string |
| Enable/disable FortiClient enforcement. | ||
fragmentation string |
| Enable/disable fragment IKE message on re-transmission. | ||
fragmentation_mtu integer | IKE fragmentation MTU (500 - 16000). | |||
group_authentication string |
| Enable/disable IKEv2 IDi group authentication. | ||
group_authentication_secret string | Password for IKEv2 IDi group authentication. (ASCII string or hexadecimal indicated by a leading 0x.) | |||
ha_sync_esp_seqno string |
| Enable/disable sequence number jump ahead for IPsec HA. | ||
idle_timeout string |
| Enable/disable IPsec tunnel idle timeout. | ||
idle_timeoutinterval integer | IPsec tunnel idle timeout in minutes (5 - 43200). | |||
ike_version string |
| IKE protocol version. | ||
include_local_lan string |
| Enable/disable allow local LAN access on unity clients. | ||
interface string | Local physical, aggregate, or VLAN outgoing interface. Source system.interface.name. | |||
ipv4_dns_server1 string | IPv4 DNS server 1. | |||
ipv4_dns_server2 string | IPv4 DNS server 2. | |||
ipv4_dns_server3 string | IPv4 DNS server 3. | |||
ipv4_end_ip string | End of IPv4 range. | |||
ipv4_exclude_range list | Configuration Method IPv4 exclude ranges. | |||
end_ip string | End of IPv4 exclusive range. | |||
id integer / required | ID. | |||
start_ip string | Start of IPv4 exclusive range. | |||
ipv4_name string | IPv4 address name. Source firewall.address.name firewall.addrgrp.name. | |||
ipv4_netmask string | IPv4 Netmask. | |||
ipv4_split_exclude string | IPv4 subnets that should not be sent over the IPsec tunnel. Source firewall.address.name firewall.addrgrp.name. | |||
ipv4_split_include string | IPv4 split-include subnets. Source firewall.address.name firewall.addrgrp.name. | |||
ipv4_start_ip string | Start of IPv4 range. | |||
ipv4_wins_server1 string | WINS server 1. | |||
ipv4_wins_server2 string | WINS server 2. | |||
ipv6_dns_server1 string | IPv6 DNS server 1. | |||
ipv6_dns_server2 string | IPv6 DNS server 2. | |||
ipv6_dns_server3 string | IPv6 DNS server 3. | |||
ipv6_end_ip string | End of IPv6 range. | |||
ipv6_exclude_range list | Configuration method IPv6 exclude ranges. | |||
end_ip string | End of IPv6 exclusive range. | |||
id integer / required | ID. | |||
start_ip string | Start of IPv6 exclusive range. | |||
ipv6_name string | IPv6 address name. Source firewall.address6.name firewall.addrgrp6.name. | |||
ipv6_prefix integer | IPv6 prefix. | |||
ipv6_split_exclude string | IPv6 subnets that should not be sent over the IPsec tunnel. Source firewall.address6.name firewall.addrgrp6.name. | |||
ipv6_split_include string | IPv6 split-include subnets. Source firewall.address6.name firewall.addrgrp6.name. | |||
ipv6_start_ip string | Start of IPv6 range. | |||
keepalive integer | NAT-T keep alive interval. | |||
keylife integer | Time to wait in seconds before phase 1 encryption key expires. | |||
local_gw string | Local VPN gateway. | |||
localid string | Local ID. | |||
localid_type string |
| Local ID type. | ||
mesh_selector_type string |
| Add selectors containing subsets of the configuration depending on traffic. | ||
mode string |
| ID protection mode used to establish a secure channel. | ||
mode_cfg string |
| Enable/disable configuration method. | ||
name string / required | IPsec remote gateway name. | |||
nattraversal string |
| Enable/disable NAT traversal. | ||
negotiate_timeout integer | IKE SA negotiation timeout in seconds (1 - 300). | |||
peer string | Accept this peer certificate. Source user.peer.name. | |||
peergrp string | Accept this peer certificate group. Source user.peergrp.name. | |||
peerid string | Accept this peer identity. | |||
peertype string |
| Accept this peer type. | ||
ppk string |
| Enable/disable IKEv2 Postquantum Preshared Key (PPK). | ||
ppk_identity string | IKEv2 Postquantum Preshared Key Identity. | |||
ppk_secret string | IKEv2 Postquantum Preshared Key (ASCII string or hexadecimal encoded with a leading 0x). | |||
priority integer | Priority for routes added by IKE (0 - 4294967295). | |||
proposal string |
| Phase1 proposal. | ||
psksecret string | Pre-shared secret for PSK authentication (ASCII string or hexadecimal encoded with a leading 0x). | |||
psksecret_remote string | Pre-shared secret for remote side PSK authentication (ASCII string or hexadecimal encoded with a leading 0x). | |||
reauth string |
| Enable/disable re-authentication upon IKE SA lifetime expiration. | ||
rekey string |
| Enable/disable phase1 rekey. | ||
remote_gw string | Remote VPN gateway. | |||
remotegw_ddns string | Domain name of remote gateway (eg. name.DDNS.com). | |||
rsa_signature_format string |
| Digital Signature Authentication RSA signature format. | ||
save_password string |
| Enable/disable saving XAuth username and password on VPN clients. | ||
send_cert_chain string |
| Enable/disable sending certificate chain. | ||
signature_hash_alg string |
| Digital Signature Authentication hash algorithms. | ||
split_include_service string | Split-include services. Source firewall.service.group.name firewall.service.custom.name. | |||
state string |
| Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object. | ||
suite_b string |
| Use Suite-B. | ||
type string |
| Remote gateway type. | ||
unity_support string |
| Enable/disable support for Cisco UNITY Configuration Method extensions. | ||
usrgrp string | User group name for dialup peers. Source user.group.name. | |||
wizard_type string |
| GUI VPN Wizard Type. | ||
xauthtype string |
| XAuth type. |
Note
- hosts: localhost vars: host: "192.168.122.40" username: "admin" password: "" vdom: "root" ssl_verify: "False" tasks: - name: Configure VPN remote gateway. fortios_vpn_ipsec_phase1: host: "{{ host }}" username: "{{ username }}" password: "{{ password }}" vdom: "{{ vdom }}" https: "False" state: "present" vpn_ipsec_phase1: acct_verify: "enable" add_gw_route: "enable" add_route: "disable" assign_ip: "disable" assign_ip_from: "range" authmethod: "psk" authmethod_remote: "psk" authpasswd: "<your_own_value>" authusr: "<your_own_value>" authusrgrp: "<your_own_value> (source user.group.name)" auto_negotiate: "enable" backup_gateway: - address: "<your_own_value>" banner: "<your_own_value>" cert_id_validation: "enable" certificate: - name: "default_name_19 (source vpn.certificate.local.name)" childless_ike: "enable" client_auto_negotiate: "disable" client_keep_alive: "disable" comments: "<your_own_value>" dhgrp: "1" digital_signature_auth: "enable" distance: "26" dns_mode: "manual" domain: "<your_own_value>" dpd: "disable" dpd_retrycount: "30" dpd_retryinterval: "<your_own_value>" eap: "enable" eap_identity: "use-id-payload" enforce_unique_id: "disable" forticlient_enforcement: "enable" fragmentation: "enable" fragmentation_mtu: "37" group_authentication: "enable" group_authentication_secret: "<your_own_value>" ha_sync_esp_seqno: "enable" idle_timeout: "enable" idle_timeoutinterval: "42" ike_version: "1" include_local_lan: "disable" interface: "<your_own_value> (source system.interface.name)" ipv4_dns_server1: "<your_own_value>" ipv4_dns_server2: "<your_own_value>" ipv4_dns_server3: "<your_own_value>" ipv4_end_ip: "<your_own_value>" ipv4_exclude_range: - end_ip: "<your_own_value>" id: "52" start_ip: "<your_own_value>" ipv4_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)" ipv4_netmask: "<your_own_value>" ipv4_split_exclude: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)" ipv4_split_include: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)" ipv4_start_ip: "<your_own_value>" ipv4_wins_server1: "<your_own_value>" ipv4_wins_server2: "<your_own_value>" ipv6_dns_server1: "<your_own_value>" ipv6_dns_server2: "<your_own_value>" ipv6_dns_server3: "<your_own_value>" ipv6_end_ip: "<your_own_value>" ipv6_exclude_range: - end_ip: "<your_own_value>" id: "67" start_ip: "<your_own_value>" ipv6_name: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)" ipv6_prefix: "70" ipv6_split_exclude: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)" ipv6_split_include: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)" ipv6_start_ip: "<your_own_value>" keepalive: "74" keylife: "75" local_gw: "<your_own_value>" localid: "<your_own_value>" localid_type: "auto" mesh_selector_type: "disable" mode: "aggressive" mode_cfg: "disable" name: "default_name_82" nattraversal: "enable" negotiate_timeout: "84" peer: "<your_own_value> (source user.peer.name)" peergrp: "<your_own_value> (source user.peergrp.name)" peerid: "<your_own_value>" peertype: "any" ppk: "disable" ppk_identity: "<your_own_value>" ppk_secret: "<your_own_value>" priority: "92" proposal: "des-md5" psksecret: "<your_own_value>" psksecret_remote: "<your_own_value>" reauth: "disable" rekey: "enable" remote_gw: "<your_own_value>" remotegw_ddns: "<your_own_value>" rsa_signature_format: "pkcs1" save_password: "disable" send_cert_chain: "enable" signature_hash_alg: "sha1" split_include_service: "<your_own_value> (source firewall.service.group.name firewall.service.custom.name)" suite_b: "disable" type: "static" unity_support: "disable" usrgrp: "<your_own_value> (source user.group.name)" wizard_type: "custom" xauthtype: "disable"
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build string | always | Build number of the fortigate image Sample: 1547 |
http_method string | always | Last method used to provision the content into FortiGate Sample: PUT |
http_status string | always | Last result given by FortiGate on last operation applied Sample: 200 |
mkey string | success | Master key (id) used in the last call to FortiGate Sample: id |
name string | always | Name of the table used to fulfill the request Sample: urlfilter |
path string | always | Path of the table used to fulfill the request Sample: webfilter |
revision string | always | Internal revision number Sample: 17.0.2.10658 |
serial string | always | Serial number of the unit Sample: FGVMEVYYQT3AB5352 |
status string | always | Indication of the operation's result Sample: success |
vdom string | always | Virtual domain used Sample: root |
version string | always | Version of the FortiGate Sample: v5.6.3 |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/fortios_vpn_ipsec_phase1_module.html