The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments |
---|---|---|
allocation_id - | The id of the elastic IP allocation. If this is not passed and the eip_address is not passed. An EIP is generated for this NAT Gateway. | |
aws_access_key string | AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key | |
aws_secret_key string | AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key | |
client_token - | Optional unique token to be used during create to ensure idempotency. When specifying this option, ensure you specify the eip_address parameter as well otherwise any subsequent runs will fail. | |
debug_botocore_endpoint_logs boolean added in 2.8 |
| Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used. |
ec2_url string | Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. | |
eip_address - | The elastic IP address of the EIP you want attached to this NAT Gateway. If this is not passed and the allocation_id is not passed, an EIP is generated for this NAT Gateway. | |
if_exist_do_not_create boolean |
| if a NAT Gateway exists already in the subnet_id, then do not create a new one. |
nat_gateway_id - | The id AWS dynamically allocates to the NAT Gateway on creation. This is required when the absent option is present. | |
profile string | Uses a boto profile. Only works with boto >= 2.24.0. | |
region string | The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region
aliases: aws_region, ec2_region | |
release_eip boolean |
| Deallocate the EIP from the VPC. Option is only valid with the absent state. You should use this with the wait option. Since you can not release an address while a delete operation is happening. |
security_token string | AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token | |
state - |
| Ensure NAT Gateway is present or absent. |
subnet_id - | The id of the subnet to create the NAT Gateway in. This is required with the present option. | |
validate_certs boolean |
| When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0. |
wait boolean |
| Wait for operation to complete before returning. |
wait_timeout - | Default: 300 | How many seconds to wait for an operation to complete before timing out. |
Note
AWS_URL
or EC2_URL
, AWS_ACCESS_KEY_ID
or AWS_ACCESS_KEY
or EC2_ACCESS_KEY
, AWS_SECRET_ACCESS_KEY
or AWS_SECRET_KEY
or EC2_SECRET_KEY
, AWS_SECURITY_TOKEN
or EC2_SECURITY_TOKEN
, AWS_REGION
or EC2_REGION
AWS_REGION
or EC2_REGION
can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file# Note: These examples do not set authentication details, see the AWS Guide for details. - name: Create new nat gateway with client token. ec2_vpc_nat_gateway: state: present subnet_id: subnet-12345678 eip_address: 52.1.1.1 region: ap-southeast-2 client_token: abcd-12345678 register: new_nat_gateway - name: Create new nat gateway using an allocation-id. ec2_vpc_nat_gateway: state: present subnet_id: subnet-12345678 allocation_id: eipalloc-12345678 region: ap-southeast-2 register: new_nat_gateway - name: Create new nat gateway, using an EIP address and wait for available status. ec2_vpc_nat_gateway: state: present subnet_id: subnet-12345678 eip_address: 52.1.1.1 wait: yes region: ap-southeast-2 register: new_nat_gateway - name: Create new nat gateway and allocate new EIP. ec2_vpc_nat_gateway: state: present subnet_id: subnet-12345678 wait: yes region: ap-southeast-2 register: new_nat_gateway - name: Create new nat gateway and allocate new EIP if a nat gateway does not yet exist in the subnet. ec2_vpc_nat_gateway: state: present subnet_id: subnet-12345678 wait: yes region: ap-southeast-2 if_exist_do_not_create: true register: new_nat_gateway - name: Delete nat gateway using discovered nat gateways from facts module. ec2_vpc_nat_gateway: state: absent region: ap-southeast-2 wait: yes nat_gateway_id: "{{ item.NatGatewayId }}" release_eip: yes register: delete_nat_gateway_result loop: "{{ gateways_to_remove.result }}" - name: Delete nat gateway and wait for deleted status. ec2_vpc_nat_gateway: state: absent nat_gateway_id: nat-12345678 wait: yes wait_timeout: 500 region: ap-southeast-2 - name: Delete nat gateway and release EIP. ec2_vpc_nat_gateway: state: absent nat_gateway_id: nat-12345678 release_eip: yes wait: yes wait_timeout: 300 region: ap-southeast-2
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
create_time string | In all cases. | The ISO 8601 date time format in UTC. Sample: 2016-03-05T05:19:20.282000+00:00' |
nat_gateway_addresses string | In all cases. | List of dictionaries containing the public_ip, network_interface_id, private_ip, and allocation_id. Sample: [{'public_ip': '52.52.52.52', 'network_interface_id': 'eni-12345', 'private_ip': '10.0.0.100', 'allocation_id': 'eipalloc-12345'}] |
nat_gateway_id string | In all cases. | id of the VPC NAT Gateway Sample: nat-0d1e3a878585988f8 |
state string | In all cases. | The current state of the NAT Gateway. Sample: available |
subnet_id string | In all cases. | id of the Subnet Sample: subnet-12345 |
vpc_id string | In all cases. | id of the VPC. Sample: vpc-12345 |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ec2_vpc_nat_gateway_module.html