New in version 2.4.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| arp_direct_route - |
| Enable VLINK direct route on VBDIF interface. |
| arp_distribute_gateway - |
| Enable the distributed gateway function on VBDIF interface. |
| dfs_all_active - |
| Creates all-active gateways. |
| dfs_id - | Specifies the ID of a DFS group. The value must be 1. | |
| dfs_peer_ip - | Configure the IP address of an all-active gateway peer. The value is in dotted decimal notation. | |
| dfs_peer_vpn - | Specifies the name of the VPN instance that is associated with all-active gateway peer. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value _public_ is reserved and cannot be used as the VPN instance name. | |
| dfs_source_ip - | Specifies the IPv4 address bound to a DFS group. The value is in dotted decimal notation. | |
| dfs_source_vpn - | Specifies the name of a VPN instance bound to a DFS group. The value is a string of 1 to 31 case-sensitive characters without spaces. If the character string is quoted by double quotation marks, the character string can contain spaces. The value _public_ is reserved and cannot be used as the VPN instance name. | |
| dfs_udp_port - | Specifies the UDP port number of the DFS group. The value is an integer that ranges from 1025 to 65535. | |
| state - |
| Determines whether the config should be present or not on the device. |
| vbdif_bind_vpn - | Specifies the name of the VPN instance that is associated with the interface. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value _public_ is reserved and cannot be used as the VPN instance name. | |
| vbdif_mac - | Specifies a MAC address for a VBDIF interface. The value is in the format of H-H-H. Each H is a 4-digit hexadecimal number, such as 00e0 or fc01. If an H contains less than four digits, 0s are added ahead. For example, e0 is equal to 00e0. A MAC address cannot be all 0s or 1s or a multicast MAC address. | |
| vbdif_name - | Full name of VBDIF interface, i.e. Vbdif100. | |
| vpn_instance - | Specifies the name of a VPN instance. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value _public_ is reserved and cannot be used as the VPN instance name. | |
| vpn_vni - | Specifies a VNI ID. Binds a VXLAN network identifier (VNI) to a virtual private network (VPN) instance. The value is an integer ranging from 1 to 16000000. |
Note
network_cli.local connections for legacy playbooks.- name: vxlan gateway module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configuring Centralized All-Active Gateways for the VXLAN Network
ce_vxlan_gateway:
dfs_id: 1
dfs_source_ip: 6.6.6.6
dfs_all_active: enable
dfs_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Bind the VPN instance to a Layer 3 gateway, enable distributed gateway, and configure host route advertisement.
ce_vxlan_gateway:
vbdif_name: Vbdif100
vbdif_bind_vpn: vpn1
arp_distribute_gateway: enable
arp_direct_route: enable
provider: "{{ cli }}"
- name: Assign a VNI to a VPN instance.
ce_vxlan_gateway:
vpn_instance: vpn1
vpn_vni: 100
provider: "{{ cli }}"
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| changed boolean | always | check to see if a change was made on the device Sample: True |
| end_state dictionary | verbose mode | k/v pairs of configuration after module execution Sample: {'dfs_id': '1', 'evn_source_ip': '6.6.6.6', 'evn_source_vpn': None, 'evn_peers': [{'ip': '7.7.7.7', 'vpn': ''}], 'dfs_all_active': 'enable'} |
| existing dictionary | verbose mode | k/v pairs of existing configuration Sample: {'dfs_id': '1', 'dfs_source_ip': None, 'evn_peer_ip': [], 'dfs_all_active': 'disable'} |
| proposed dictionary | verbose mode | k/v pairs of parameters passed into module Sample: {'dfs_id': '1', 'dfs_source_ip': '6.6.6.6', 'dfs_all_active': 'enable', 'dfs_peer_ip': '7.7.7.7'} |
| updates list | always | commands sent to the device Sample: ['dfs-group 1', 'source ip 6.6.6.6', 'active-active-gateway', 'peer 7.7.7.7'] |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ce_vxlan_gateway_module.html