New in version 2.4.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| auth_mode - |
| Specify authentication algorithm. |
| auth_pwd - | Plain text with length of 1 to 255, encrypted text with length of 20 to 392. | |
| auth_type - |
| Whether the given password is in cleartext or has been encrypted. If in cleartext, the device will encrypt it before storing it. |
| authentication - |
| Configure ntp authentication enable or unconfigure ntp authentication enable. |
| key_id - / required | Authentication key identifier (numeric). | |
| state - |
| Manage the state of the resource. |
| trusted_key - |
| Whether the given key is required to be supplied by a time source for the device to synchronize to the time source. |
Note
state=absent, the module will attempt to remove the given key configuration. If a matching key configuration isn’t found on the device, the module will fail.state=absent and authentication=on, authentication will be turned on.state=absent and authentication=off, authentication will be turned off.network_cli.local connections for legacy playbooks.- name: NTP AUTH test
hosts: cloudengine
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: "Configure ntp authentication key-id"
ce_ntp_auth:
key_id: 32
auth_mode: md5
auth_pwd: 11111111111111111111111
provider: "{{ cli }}"
- name: "Configure ntp authentication key-id and trusted authentication keyid"
ce_ntp_auth:
key_id: 32
auth_mode: md5
auth_pwd: 11111111111111111111111
trusted_key: enable
provider: "{{ cli }}"
- name: "Configure ntp authentication key-id and authentication enable"
ce_ntp_auth:
key_id: 32
auth_mode: md5
auth_pwd: 11111111111111111111111
authentication: enable
provider: "{{ cli }}"
- name: "Unconfigure ntp authentication key-id and trusted authentication keyid"
ce_ntp_auth:
key_id: 32
state: absent
provider: "{{ cli }}"
- name: "Unconfigure ntp authentication key-id and authentication enable"
ce_ntp_auth:
key_id: 32
authentication: enable
state: absent
provider: "{{ cli }}"
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| changed boolean | always | check to see if a change was made on the device Sample: True |
| end_state dictionary | always | k/v pairs of ntp authentication after module execution Sample: {'authentication': 'off', 'authentication-keyid': [{'auth_mode': 'md5', 'key_id': '1', 'trusted_key': 'disable'}, {'auth_mode': 'md5', 'key_id': '32', 'trusted_key': 'enable'}]} |
| existing dictionary | always | k/v pairs of existing ntp authentication Sample: {'authentication': 'off', 'authentication-keyid': [{'auth_mode': 'md5', 'key_id': '1', 'trusted_key': 'disable'}]} |
| proposed dictionary | always | k/v pairs of parameters passed into module Sample: {'auth_type': 'text', 'authentication': 'enable', 'key_id': '32', 'auth_pwd': '1111', 'auth_mode': 'md5', 'trusted_key': 'enable', 'state': 'present'} |
| state string | always | state as sent in from the playbook Sample: present |
| updates list | always | command sent to the device Sample: ['ntp authentication-key 32 md5 1111', 'ntp trusted-key 32', 'ntp authentication enable'] |
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ce_ntp_auth_module.html