W3cubDocs

bigip_ucs – Manage upload, installation and removal of UCS files

New in version 2.4.

Synopsis
Parameters
Notes
Examples
Status

Synopsis

Manage upload, installation and removal of UCS files.

Parameters

Parameter		Choices/Defaults	Comments
force boolean		Choices: no ← yes	If `yes` will upload the file every time and replace the file on the device. If `no`, the file will only be uploaded if it does not already exist. Generally should be `yes` only in cases where you have reason to believe that the image was corrupted during upload.
include_chassis_level_config boolean		Choices: no yes	During restore of the UCS file, include chassis level configuration that is shared among boot volume sets. For example, cluster default configuration.
no_license boolean		Choices: no yes	Performs a full restore of the UCS file and all the files it contains, with the exception of the license file. The option must be used to restore a UCS on RMA devices (Returned Materials Authorization).
no_platform_check boolean		Choices: no yes	Bypasses the platform check and allows a UCS that was created using a different platform to be installed. By default (without this option), a UCS created from a different platform is not allowed to be installed.
passphrase string			Specifies the passphrase that is necessary to load the specified UCS file.
provider dictionary added in 2.5			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	ssh_keyfile path		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
reset_trust boolean		Choices: no yes	When specified, the device and trust domain certs and keys are not loaded from the UCS. Instead, a new set is regenerated.
state string		Choices: absent installed present ←	When `installed`, ensures that the UCS is uploaded and installed, on the system. When `present`, ensures that the UCS is uploaded. When `absent`, the UCS will be removed from the system. When `installed`, the uploading of the UCS is idempotent, however the installation of that configuration is not idempotent.
ucs string			The path to the UCS file to install. The parameter must be provided if the `state` is either `installed` or `activated`. When `state` is `absent`, the full path for this parameter will be ignored and only the filename will be used to select a UCS for removal. Therefore you could specify `/mickey/mouse/test.ucs` and this module would only look for `test.ucs`.

Notes

Note

Only the most basic checks are performed by this module. Other checks and considerations need to be taken into account. See the following URL. https://support.f5.com/kb/en-us/solutions/public/11000/300/sol11318.html
This module does not handle devices with the FIPS 140 HSM
This module does not handle BIG-IPs systems on the 6400, 6800, 8400, or 8800 hardware platform.
This module does not verify that the new or replaced SSH keys from the UCS file are synchronized between the BIG-IP system and the SCCP
This module does not support the ‘rma’ option
This module does not support restoring a UCS archive on a BIG-IP 1500, 3400, 4100, 6400, 6800, or 8400 hardware platform other than the system from which the backup was created
The UCS restore operation restores the full configuration only if the hostname of the target system matches the hostname on which the UCS archive was created. If the hostname does not match, only the shared configuration is restored. You can ensure hostnames match by using the bigip_hostname Ansible module in a task before using this module.
This module does not support re-licensing a BIG-IP restored from a UCS
This module does not support restoring encrypted archives on replacement RMA units.
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Upload UCS
  bigip_ucs:
    ucs: /root/bigip.localhost.localdomain.ucs
    state: present
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Install (upload, install) UCS.
  bigip_ucs:
    ucs: /root/bigip.localhost.localdomain.ucs
    state: installed
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Install (upload, install) UCS without installing the license portion
  bigip_ucs:
    ucs: /root/bigip.localhost.localdomain.ucs
    state: installed
    no_license: yes
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Install (upload, install) UCS except the license, and bypassing the platform check
  bigip_ucs:
    ucs: /root/bigip.localhost.localdomain.ucs
    state: installed
    no_license: yes
    no_platform_check: yes
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Install (upload, install) UCS using a passphrase necessary to load the UCS
  bigip_ucs:
    ucs: /root/bigip.localhost.localdomain.ucs
    state: installed
    passphrase: MyPassphrase1234
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Remove uploaded UCS file
  bigip_ucs:
    ucs: bigip.localhost.localdomain.ucs
    state: absent
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/bigip_ucs_module.html